Because you weren't there last night to ask me then :ohgeez:.
2x18650 was an easy attempt given my setup. Too late to try it now. Maybe next time....or another member can give it a go.
I bought a new version MAG 3D with Rebel reflector and emmitter for my SST-50 Mod.
After removing the switch assy which I won't be using in my build, I considered where I could put to use.
I used an old 2d host and fitted it with the new 3D LED assy. I used the old style reflector. you...
Some more things to consider.
Here is my CAD progression
AutoCAD 10-12
Microstation
SDRC IDeas (3d modeling)
Pre Engineer
SolidWorks
First of all every system as stength and weakness. Each system does things a little different.
Secondly there is also a cost history.
Microstation came...
IMHO Here is my 2 cents on boring tooling. At work we use kenametal, seco, and sanvik inserts. We also use tooling from each co. Here is my opinnion.
Sanvik - Excellant tooling with high price tags. Their anti vib boring bars can not be beat. If you need to go deep - they are the best. But it...
I know you don't want to drill thru, but here is a simple idea for function.
Drill thru with a smaller diameter then detent ball. This will allow the ball to partially enter hole without passing thru. I will keep thinking about your original request.
Second idea would be to drill thru from...
Well it seems like a concensus toward the rebel reflector.
This leads toward a design challenge for the heat sink. The reflector needs space on top and the h6flex driver will need space on the bottom.
I need to see how much will be left for the actual sink.
I have also been considering...
SSR-50 VS 90
Given the cost of over all build 50 vs 90 is not that much of a diverence. What is the advatage of under driving a 90 vs full drive on 50? For daily use I will normally be under driving the 50.
As to heat sink, I have access to free alum drop at work. I was considering some...
Thanks for input from thread below.
http://www.candlepowerforums.com/vb/showthread.php?t=283307
Based on feedback there my goals have expanded to this build.
I will maintain this thread for seeking more CPF input and as a build log.
My intent for this build is creation of a very useful...
I hate being indecisive. If I need to boost amperage, why not just go with 2x26650 and get the added runtime to boot.
I would like to be able to run the ssr-50 to full spec to show other the potential of modding, but I don't see myself walking around on full power. Low should be very usable...
Here is the latest evolution.
Mag C cutdown to 1x26650
1x IMR 26650
SSR-50 star (on order from AVNET)
Heatsink (by me)
Maglite rebel SMO reflector (salvaged from 4d led)
I still want multi levels and need help picking the driver. I am currently debating between...
Still reading the forums and debating.
I want a platform that I can experiment with Reflectors and aspherics lens (or collimator plus ashperic). Surplus shed is located 20 minutes from where I live (easy to kill lots of time).
This leads me toward XRE or XPG. So I am leaning toward XPG being...
Here are my current thoughts. Please comment.
Mag 2c cut down to 1x26650
Britelumens Deluxe Mag C heatsink / P7 DSWOI combo
What driver option for 3 or 4 mode multi level output? How about this one from shining beam...