Rexlight REX2.1 Cree XR-E - Mini Review - UPDATE: Received new REX2.1 Impressive...

UPDATE 8/3-07: After finding the first REX2.1 I received was a defective ond and was not living up to the specifications provided, Kai at Kaidomain.com send me a new one that just received today (very good service) and let me just say WOW . So not it is time to update the review now when I have received a fully working REX2.1. Did not have time to edit the pictures I took, so the new pictures does not contain any writings on them.

For all of you who are holding back of getting one as a result of the bad output of the first one I got, I can now say that Kai @ Kaidomain will be QC every REX2.1 before shipping, so new buyers should not be worried of getting a defective one, it was as far as I can tell rexlight that faild on QC thir products.

Now to the review, anjoy .

Just received the brand new Rexlight REX2.1 (updated version of REX2.0). Got it directly from Kai @ Kaidomain, you can also buy it at Lighthound: http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=2893

This review will focusing on what is new in the REX2.1 compared to REX2.0. If you want more details on REX2.0 I can point you to this review: https://www.candlepowerforums.com/threads/161789&highlight=rexlight

Updates in REX2.1 compared to REX2.0:
New UI (User Interface) with only 2sec memory function, plus tree new light modes (Daily/Tactic/Advance), I have made a video of the UI in action here: http://www.youtube.com/watch?v=0ZrazfJRGSM
The glass lens I thicker and has a better AR-Coating.
New LED&Reflector module (kind of a drop in module).
More soft rubber on/off switch cover makes it easier to turn it on/off.
Reflector is more textured, makes a not quite as good beam as REX2.0 IMO.
The PWM is now completely Flicker-free on low (I can't notice any flicker with my bare eye).
Only one o-ring in each end = easier to change battery compared to REX2.0.
LED/PCB now glued to the heatsink.
Low battery warning on Li-Ion (works very well).

That was all I could think of right now, here is what I find good and bad:

The bad - <-Updated!
- "Only" one o-ring in each end (REX2.0 had two).
- New reflector has noticeable dark halo surrounding the hotspot (the old REX2.0 was much better).
- The new switch rubber cover, makes it harder to make the flashlight stand on its tail (better on the new one I got).

The good + <-Updated!
+ Very bright, brightest one I got.
+ Switch much easier to press with new rubber cover.
+ Lens is thicker and much better AR-coating.
+ The UI is MUCH better than the REX2.0, like the "blink" when a mode has bean on for longer than 2 sec (indicating that the mode will be used next time turned on).
+ Like the new LED&Reflector module, like a drop in (reflector is tighten to the LED module).
+ The one o-ring makes it much easier to change battery.
+ Flicker free, no noticeable flicker detected with the bare eye on low.
+ Low battery indicator on Li-Ion (blinks when battery is low).
+ Good looking HAIII.

Now to some pictures for you to enjoy .

Left: NEW REX2.1, Right: OLD REX2.1 <-Updated!

































The REX2.0 is NOT the original PCB/LED, my LED burned, so changed the whole PCB/LED module.


















---

Now to the beamshot department, enjoy .

Left: REX2.1 (NEW) Alkaline on High, Right: REX2.1 (OLD) Alkaline on High <-Updated!

Left: REX2.1 (NEW) Alkaline on High, Right: REX2.1 (OLD) Alkaline on High, 2-stops underexposed <-Updated!

Left: REX2.1 (NEW) Ni-Mh on High, Right: REX2.1 (OLD) Ni-Mh on High <-Updated!

Left: REX2.1 (NEW) Ni-Mh on High, Right: REX2.1 (OLD) Ni-Mh on High, 2-stops underexpose <-Updated!

Left: REX2.1 (NEW) Li-Ion on High, Right: REX2.1 (OLD) Li-Ion on High <-Updated!

Left: REX2.1 (NEW) Li-Ion on High, Right: REX2.1 (OLD) Li-Ion on High, 2-stops underexpose <-Updated!

Left: REX2.1 (NEW) Li-Ion on High, Right: REX2.0 Li-Ion on High <-Updated!

Left: REX2.1 (NEW) Li-Ion on High, Right: REX2.0 Li-Ion on High, 2-stops underexpose <-Updated!

Left: REX2.1 (NEW) Li-Ion on High, Right: L1T with Rebel Li-Ion on High <-Updated!

Left: REX2.1 (NEW) Li-Ion on High, Right: L1T with Rebel Li-Ion on High, 2-stops underexpose <-Updated!

Left: REX2.1 (NEW) Alkaline on High, Right: Fenix L1D-CE Alkaline on Turbo <-Updated!

Left: REX2.1 (NEW) Alkaline on High, Right: Fenix L1D-CE Alkaline on Turbo, 2-stops underexpose <-Updated!

Left: REX2.1 (NEW) Ni-MH on High, Right: Fenix L1D-CE Ni-MH on Turbo <-Updated!

Left: REX2.1 (NEW) Ni-MH on High, Right: Fenix L1D-CE Ni-MH on Turbo, 2-stops underexpose <-Updated!

Left: REX2.1 (NEW) Ni-Mh on Medium, Right: L1D-CE OP Ni-Mh on Medium <-Updated!

Left: REX2.1 (NEW) Ni-Mh on Medium, Right: L1D-CE OP Ni-Mh on Medium, 2-stops underexposed <-Updated!

Left: REX2.1 (NEW) Ni-Mh on Low, Right: L1D-CE OP Ni-Mh on Low <-Updated!

Left: REX2.1 (NEW) Ni-Mh on Low, Right: L1D-CE OP Ni-Mh on Low, 2-stops underexposed <-Updated!

Left: REX2.1 (NEW) Li-Ion on High, Right: Fenix L1D-CE Li-Ion on Turbo <-Updated!

Left: REX2.1 (NEW) Li-Ion on High, Right: Fenix L1D-CE Li-Ion on Turbo, 2-stops underexpose <-Updated!


---

Now to the Lux readings department...:naughty:...

Here is some Lux reading of Overall Output:

Rexlight REX2.1 (NEW): <-Updated!
1xAA Ni-Mh on high: 4660 Lux
1xAA Ni-Mh on medium: 1819 Lux
1xAA Ni-Mh on low: 179 Lux
1xAA Alkaline on high: 4130 Lux
1xAA Alkaline on medium: 1771 Lux
1xAA Alkaline on low: 180 Lux
1x14500 Li-ion on high: 9150 Lux
1x14500 Li-ion on medium: 3710 Lux
1x14500 Li-ion on low: 601 Lux

Rexlight REX2.1 (OLD):
1xAA Ni-Mh on high: 2810 Lux
1xAA Ni-Mh on medium: 910 Lux
1xAA Ni-Mh on low: 94 Lux
1xAA Alkaline on high: 2670 Lux
1xAA Alkaline on medium: 843 Lux
1xAA Alkaline on low: 94 Lux
1x14500 Li-ion on high: 7310 Lux
1x14500 Li-ion on medium: 3060 Lux
1x14500 Li-ion on low: 470 Lux

Amilite T5:
1xRCR123A 3.0v on high: 8340 Lux
1xRCR123A 3.7v on high: 10910 Lux
Dereelight DR-CL1H:
1x18650 3.7v SSC P4 on high: 7300 Lux
1x18650 3.7v SSC P4 on low: 2190 Lux
2xRCR123A 3.7v SSC P4 on high: 7740 Lux
2xRCR123A 3.7v SSC P4 on low: 3450 Lux
1x18650 3.7v Cree XR-E on high: 7340 Lux
1x18650 3.7v Cree XR-E on low: 2560 Lux
2xRCR123A 3.7v Cree XR-E on high: 7290 Lux
2xRCR123A 3.7v Cree XR-E on low: 2840 Lux
Fenix L1D-CE:
1xAA Ni-Mh on turbo: 3990 Lux
1xAA Ni-Mh on high: 3770 Lux
1xAA Ni-Mh on medium: 1910 Lux
1xAA Ni-Mh on low: 430 Lux
1xAA Ni-Mh OP on turbo: 4410 Lux
1xAA Ni-Mh OP on high: 4030 Lux
1xAA Ni-Mh OP on medium: 2060 Lux
1xAA Ni-Mh OP on low: 460 Lux
1xAA Alkaline OP on turbo: 4400 Lux
1xAA Alkaline OP on high: 3650 Lux
1xAA Alkaline OP on medium: 1922 Lux
1xAA Alkaline OP on low: 420 Lux
1x14500 Li-ion on turbo: 8240 Lux
1x14500 Li-ion OP on turbo: 8390 Lux
Led-Lenser Hokus Fokus:
3xAAA Ni-Mh: 4850 Lux
Lumapower M1:
1x18650 XR-E OP on high: 8140 Lux
1x18650 XR-E OP on low: 1640 Lux
2xRCR123A 3.7v XR-E OP: 8950 Lux
1x18650 SSC P4 OP: 5540 Lux
2xRCR123A 3.7v SSC P4 OP: 8230 Lux
Lumapower Tactical M1:
1x18650 3.7v OP on high: 7770 Lux
1x18650 3.7v SM on high: 8140 Lux
2xRCR123A 3.7v OP on high: 8130 Lux
2xRCR123A 3.7v SM on high: 8250 Lux
Lumapower LP-Mini:
1xRCR123A 3.7v OP: 7810 Lux
Lumapower M3:
1xAA Ni-Mh on high: 3640 Lux
1xAA Ni-Mh on medium: 1270 Lux
1xAA Ni-Mh on low: 40 Lux
2xAA Ni-Mh on high: 4300 Lux
2xAA Ni-Mh on medium: 1310 Lux
2xAA Ni-Mh on low: 350 Lux
1x14500 Li-Ion on high: 5880 Lux
1x14500 Li-Ion on medium: 3020 Lux
1x14500 Li-Ion on low: 690 Lux
1xRCR123A 3.7v on high: 4390 Lux
1xRCR123A 3.7v on medium: 2940 Lux
1xRCR123A 3.7v on low: 680 Lux
Nuwai X-3:
2xAA Ni-Mh: 3020 Lux
Ultrafire WF-500L:
2x18650 3.7v: 4660 Lux
Rexlight REX2.0:
1xAA Ni-Mh on high: 3810 Lux
1xAA Ni-Mh on medium: 810 Lux
1xAA Ni-Mh on low: 210 Lux
1xAA Alkaline on high: 4420 Lux
1xAA Alkaline on medium: 980 Lux
1xAA Alkaline on low: 252 Lux
1x14500 Li-Ion on high: 5550 Lux
1x14500 Li-Ion on medium: 1570 Lux
1x14500 Li-Ion on low: 570 Lux
Waion VB-16 4th gen.:
1x18650 3.7v on high: 8970 Lux
1x18650 3.7v on low: 48 Lux
2x18650 3.7v on high: 9150 Lux
2x18650 3.7v on low: 55 Lux
2xRCR123A 3.7v on high: 9090 Lux
2xRCR123A 3.7v on low: 53 Lux

Here is some Lux reading at 1m in Throw:

Rexlight REX2.1 (NEW): <-Updated!
1xAA Ni-Mh on high: 1463 Lux
1xAA Ni-Mh on medium: 594 Lux
1xAA Ni-Mh on low: 61 Lux
1xAA Alkaline on high: 1193 Lux
1xAA Alkaline on medium: 582 Lux
1xAA Alkaline on low: 61 Lux
1x14500 Li-ion on high: 2760 Lux
1x14500 Li-ion on medium: 1154 Lux
1x14500 Li-ion on low: 192 Lux

Rexlight REX2.1 (OLD):
1xAA Ni-Mh on high: 629 Lux
1xAA Ni-Mh on medium: 256 Lux
1xAA Ni-Mh on low: 27 Lux
1xAA Alkaline on high: 776 Lux
1xAA Alkaline on medium: 250 Lux
1xAA Alkaline on low: 30 Lux
1x14500 Li-ion on high: 1850 Lux
1x14500 Li-ion on medium: 800 Lux
1x14500 Li-ion on low: 118 Lux

Amilite T5:
1xRCR123A 3.0v on high: 2520 Lux
1xRCR123A 3.7v on high: 3260 Lux
Dereelight DR-CL1H:
1x18650 3.7v SSC P4 on high: 2430 Lux
1x18650 3.7v SSC P4 on low: 1110 Lux
2xRCR123A 3.7v SSC P4 on high: 2540 Lux
2xRCR123A 3.7v SSC P4 on low: 1550 Lux
1x18650 3.7v Cree XR-E on high: 3290 Lux
1x18650 3.7v Cree XR-E on low: 1160 Lux
2xRCR123A 3.7v Cree XR-E on high: 3410 Lux
2xRCR123A 3.7v Cree XR-E on low: 1380 Lux
Fenix L1D CE:
1xAA Ni-Mh on turbo: 1460 Lux
1xAA Ni-Mh OP on turbo: 1510 Lux
1xAA Ni-Mh OP on high: 1410 Lux
1xAA Ni-Mh OP on medium: 730 Lux
1xAA Ni-Mh OP on low: 170 Lux
1xAA Alkaline OP on turbo: 1374 Lux
1xAA Alkaline OP on high: 1196 Lux
1xAA Alkaline OP on medium: 690 Lux
1xAA Alkaline OP on low: 124 Lux
1x14500 Li-ion on turbo: 3150 Lux
1x14500 Li-ion OP on turbo: 2820 Lux
Led-Lenser Hokus Fokus:
3xAAA Ni-Mh: 4460 Lux
Lumapower M1:
1x18650 XR-E OP on high: 4820 Lux
2xRCR123A 3.7v XR-E OP: 5500 Lux
Lumapower Tactical M1:
1x18650 3.7v OP on high: 4940 Lux
1x18650 3.7v SM on high: 7150 Lux
2xRCR123A 3.7v OP on high: 5070 Lux
2xRCR123A 3.7v SM on high: 7390 Lux
Lumapower M3:
1xAA Ni-Mh on high: 1240 Lux
2xAA Ni-Mh on high: 1530 Lux
1x14500 Li-Ion on high: 1980 Lux
1xRCR123A 3.7v on high: 1550 Lux
Lumapower Lp-Mini:
1xRCR123A 3.7v OP: 4700 Lux
Nuwai X-3:
2xAA Ni-Mh: 1340 Lux
Ultrafire WF-500L:
2x18650 3.7v: 4710 Lux
Rexlight REX2.0:
1xAA Ni-Mh on high: 840 Lux
1xAA Ni-Mh on medium: 210 Lux
1xAA Ni-Mh on low: 60 Lux
1xAA Alkaline on high: 1087 Lux
1xAA Alkaline on medium: 256 Lux
1xAA Alkaline on low: 83 Lux
1x14500 Li-Ion on high: 1460 Lux
1x14500 Li-Ion on medium: 460 Lux
1x14500 Li-Ion on low: 160 Lux
Waion VB-16 4th gen.:
1x18650 3.7v on high: 4540 Lux
2x18650 3.7v on high: 4560 Lux
2xRCR123A 3.7v on high: 5230 Lux

---

First runtime done:
1x AW Protected 14500 Li-Ion: 1hour 12min 40sec, until the protection circuit kicked in (the flashlight flashes).
1x Ni-Mh 2500Mah: 1hour 45min -> 50% Stopped the test after 2hours still with decent light (and many hours forward).

---

Some throw shot for ya all .

Rexlight REX2.1 (NEW) Li-Ion on High <-Updated!

Rexlight REX2.0 Li-Ion on High <-Updated!

Fenix L1D-CE OP Li-Ion on Turbo <-Updated!

Fenix L1T Rebel Li-Ion on High <-Updated!

Rexlight REX2.1 (NEW) Alkaline on High <-Updated!

Rexlight REX2.0 Alkaline on High <-Updated!

Fenix L1D-CE OP Alkaline on Turbo <-Updated!

Rexlight REX2.1 (NEW) Ni-Mh on High <-Updated!

Rexlight REX2.0 Ni-Mh on High <-Updated!

Fenix L1D-CE OP Ni-Mh on Turbo <-Updated!

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

whc,

Thanks so much for such a detailed and professional review. You put a lot of time into that!

The only thing I didn't see, and forgive me if I missed this somewhere, is Lux readings on the 2.1 on a 14500 on high.

Thanks again for your terrific work. :thumbsup:

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

Well done! That's what I call a review.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

AFAustin said:

whc,

Thanks so much for such a detailed and professional review. You put a lot of time into that!

The only thing I didn't see, and forgive me if I missed this somewhere, is Lux readings on the 2.1 on a 14500 on high.

Thanks again for your terrific work. :thumbsup:

Click to expand...

Was a little error on the lux readings, corrected ...

It is very bright on 14500, brighter than REX2.0, but on Ni-Mh it is just awful.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

Kai knew that you were going to be the intial, in depth review. To not inspect your sample prior to shipping, is a FUBABelief.

I'll hold off, until the upgrades for the 2.0 come out.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

Wow, nice review. Very well done. However, I wish you were talking on your video to help walk through the UI. Anyway, Thanks!

Well, I must say I am impressed and disappointed at the same time. Can't say for sure yet as to which way I am leaning.

The good for me:
- New UI (I love that it starts out in LOW)
- Low battery warning on Lith-ions
- 2 sec. memory
- Flicker-free PWM
- A very low, low (even on Lith-ion)... NICE!!!!

The bad for me:
- It appears that it is brighter with a Lith-ion than the Rex 2.0, but still not even as bright as the L1D-CE. This was supposed to be brighter than the L1D-CE!
- Dark Halo??? I believe the reflector is too stippled for me. I prefer the Rex 2.0 reflector. I really like the lens though.
- HAIII has a slight, but very noticable mismatch.
- Can't even tail stand with GITD tailcap? Come on now.
- Not liking that it is a tad bigger than the Rex 2.0...
- The lows look a little blue to me, maybe it is just the pics.... or me.

I wonder if buying the Rex 2.0 and then getting the upgrade module is the way to go...

Oh, how is the heat while running a 14500?

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

BobbyRS said:

It appears that it is brighter with a Lith-ion than the Rex 2.0, but still not even as bright as the L1D-CE. This was supposed to be brighter than the L1D-CE!

Click to expand...

Depends on how you look at it. The L1D was not made to run on li-ion and has only one level of light with one. The Rex has all of it's levels. The L1D is only about 15lms brighter, not much.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

BobbyRS said:

Wow, nice review. Very well done. However, I wish you were talking on your video to help walk through the UI. Anyway, Thanks!

Well, I must say I am impressed and disappointed at the same time. Can't say for sure yet as to which way I am leaning.

The good for me:
- New UI (I love that it starts out in LOW)
- Low battery warning on Lith-ions
- 2 sec. memory
- Flicker-free PWM
- A very low, low (even on Lith-ion)... NICE!!!!

The bad for me:
- It appears that it is brighter with a Lith-ion than the Rex 2.0, but still not even as bright as the L1D-CE. This was supposed to be brighter than the L1D-CE!
- Dark Halo??? I believe the reflector is too stippled for me. I prefer the Rex 2.0 reflector. I really like the lens though.
- HAIII has a slight, but very noticable mismatch.
- Can't even tail stand with GITD tailcap? Come on now.
- Not liking that it is a tad bigger than the Rex 2.0...
- The lows look a little blue to me, maybe it is just the pics.... or me.

I wonder if buying the Rex 2.0 and then getting the upgrade module is the way to go...

Oh, how is the heat while running a 14500?

Click to expand...

Yes both bad and good news, it will not replace my L1D-CE ad EDC, was hoping it would, like the Rexlight looks/feel/size better than L1D, but for now it not quite makes it for me.

The flashlight gets hot on Li-Ion 14500, but not too hot to hold in hand. Am in the middle of a runtime on 14500 protected 1 hour 10 minutes and counting, not bad.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

First runtime done:
1x AW Protected 14500 Li-Ion: 1hour 12min 40sec, until the protection circuit kicked in (the flashlight flashes).

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

Nake said:

Depends on how you look at it. The L1D was not made to run on li-ion and has only one level of light with one. The Rex has all of it's levels. The L1D is only about 15lms brighter, not much.

Click to expand...

I am looking at it the only way I can; brightness. The Rex 2.1 was supposed to be brighter on a 14500 than an L1D-CE. See Kais' post here showing the graph:
http://www.cpfmarketplace.com/mp/showpost.php?p=2034949&postcount=2

And his response here:
http://www.cpfmarketplace.com/mp/showpost.php?p=2036397&postcount=66

kaidomain said:

See the brightness comparison between Fenix L1D CE and REX2.1. MKIIx stands no chance...

Click to expand...

The JetBeam MKIIx that I've seen are even brighter than the L1D-CE, so with Kai's comments, I was thinking that the Rex 2.1 should at least be brighter then the L1D-CE.

Also:

UnknownVT said:

On freshly charged 3.7V Li-Ion 14500 - all the brightness levels (low, medium, high and Turbo) appear to be the same. When the battery's voltage drops then the levels are differentiated - however that also means the battery is near the end of its capacity.

From: https://www.candlepowerforums.com/posts/1862002&postcount=751

Click to expand...

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

The reflector/LED/driver sandwich does look quite different to the rex2.0 ... how will the upgrade module fit in the old rex?

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

whc - great review! Thanks very much! Would you be able to take any output measurements on alkaline AAs? That's what I plan to use and am wondering if the extra voltage from alkalines would help the output somewhat. Runtime comparison with alkaline between the 2.1 and 2.0 would also be very greatly appreciated! Thanks.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

waTom said:

The reflector/LED/driver sandwich does look quite different to the rex2.0 ... how will the upgrade module fit in the old rex?

Click to expand...

As far as I kan understand, the new upgrade will be included LED module, Reflector, and Lens. The internal dia. is the same on both, so should fit without a problem.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

whc - thank you for an incredible in depth review. It does appear though that the 2.0 is still brigher even with the Li-Ion on high. It also seems that Kai is again missing the mark on a number of claims about this light.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

matrixshaman said:

whc - thank you for an incredible in depth review. It does appear though that the 2.0 is still brigher even with the Li-Ion on high. It also seems that Kai is again missing the mark on a number of claims about this light.

Click to expand...

The hotspot of REX2.1 is not as strong as REX2.0 (more floody, and not as good quality wise as REX2.0), I think that it makes it appear les bright than it actually is, the lux readings is over 2000 lux more for the REX2.1 on 14500, so overall more light is defiantly coming from the REX2.1.

The new reflector is not good at all IMO, like the old one better, to bad they changed this, because it was as perfect as it could get on REX2.0 .

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

Any chance for alkaline outputs and runtimes whc? Thanks.

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

jsr said:

Any chance for alkaline outputs and runtimes whc? Thanks.

Click to expand...

Would have to get som alkalines, don't think I have some in the house, or do I will see if I can find some 2 sec ...

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

jsr said:

Any chance for alkaline outputs and runtimes whc? Thanks.

Click to expand...

Wee found some Memorex, though don't see Alkaline written on them, see Zink if that is some battery tecnology???

See this image:


Will they do?

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

That's carbon Zinc, heavy duty.

Much weaker than alkaline.

So is this the order you like?

1. Fenix L1D
2. Rex 2.0
3. Rex 2.1

?

Re: Rexlight REX2.1 Cree XR-E - Mini Review - Comparing to REX2.0

gunga said:

That's carbon Zinc, heavy duty.

Much weaker than alkaline.

So is this the order you like?

1. Fenix L1D
2. Rex 2.0
3. Rex 2.1

?

Click to expand...

Ok, will se if I can remember to get some good alkaline's tomorrow then ...

If I had to make a list it would be like this:

1. Fenix L1D-CE (har to beat, very good on Ni-Mh)
2. Rexlight REX2.1/2.0 (both have issues I don't like)
3. Amilite T5 (Bright, but poor runtime on Li-Ion)
4. Lumapower M3 (To big and bulky, but good quality beam)
5. Dexlight X.1. (don't have one anymore, but it is just to advanced)