123 x minimag

Candle Power Forums

Help Support Candle Power:

lanterna

Newly Enlightened
Joined
Nov 10, 2002
Messages
16
City & State/Province
BRAZIL
How many 123 batt? could i stuck in a mini mag?what lamp could i use, even enlarging the syze of the hollow?
 
A 123 will not fit in a mini-mag. They are to large. You might use 3 each "N" size batteries for a total of 4.5v.
 
Three 123s are the length of two AAs. You would need to enlarge the ID of the Minimag resulting in an ID that would be dangerously close to the OD. For an alternate light, do a search on Coleman AA.
 
Even if there was enough OD to bore out to fit the 123's, it would destroy the threads where the tailcap screws on.

But don't feel bad, you're not the first one to think of doing this..
grin.gif
grin.gif
grin.gif


I did a write-up in this thread that describes how to build a 2AA/3-123 Coleman mod. The Coleman was chosen because it was the only economical light I could find that possessed the required attributes to make the mod work.
 
OK, what are N batteries?! I tried engergizer's site but couldn't find anything about them. Are the lithiums?
 
A "N" battery is kinda like a shorty AAA. They can be found most anywhere in the US. The last one I bought was from a grocery store.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
I use 3N in my AA Mini Mag with that really bright Cyan-Green LED in it. Nice and bright enough for nighttime use without disturbing others
 
three N's around 1/4 inch shorter than 2 AA's, what do you use to fill the gap?
 

Latest posts

Back
Top