THIS SALES THREAD IS CLOSED
NEW THREAD HERE
Hey Guys,
Today I have some fresh Titanium Bodies, Heads, and Tails to fit the popular E-series parts.
Made in USA from domestic 6Al4V titanium
Tails are E-series compatible
Tritium slots in bezel rings and tails fit 1.5 x 5.5mm vials
Mcclicky switch in tailcap with titanium button.
All parts fully o-ringed and protected from water intrusion.
2 piece body avoids thin area under head o-ring
There is a brass button installed at the head end to allow the use of flat top cells.
These heads accept a P60 drop-in.
They are designed to accommodate my Torch Lab Triple drop-in or a Malkoff drop-in
I make zero guarantees on the fit of any other drop-ins.
I have fit a few chinese drops into these, and the ones I have here fit fine.
The heads come with my Titanium crenulated bezel rings, UCL glass, and o-ring.
I have approached this split body design from my own direction. However, I would like to credit TB for pioneering this concept. (copied and edited from Precisionworks thread)
NOTE: this E-series split body concept is inspired by the efforts, design work & machining first conducted by Scott Thomson of TBSB (TranquilityBase). TBSB also designed & sold an 18650 non-split design that fit the E-series head with a C-series tail (circa 2005). Thank you Scott for your split body design that has withstood the test of time & will continue to be popular for many years to come.
This is a small run of parts.
There are only a couple of each style and size.
-----------------------------------------------------------------------------------------------------------------------------
Style 82 18350 body and tail $340
Style 82 18500 body and tail $350
Style 82 18650 body and tail $360
Slim tails are available for style 82
-----------------------------------------------------------------------------------------------------------------------------
Style 77 18350 body and tail $340
Style 77 18500 body and tail $350
-----------------------------------------------------------------------------------------------------------------------------
Style 44 18500 body and tail $350
-----------------------------------------------------------------------------------------------------------------------------
Style 510 18350 body and tail $340
Style 510 18650 body and tail $360
Slim tails are available for style 510
Head with bezel ring, UCL glass, o-ring $200
Available with purchase of body/tail assembly only.
I do not have any trits available at this time.
Parts ship with empty trit slots.
$10 Priority mail insured USA
$20 Priority mail Worldwide
Thank You for your support.
NEW THREAD HERE
Hey Guys,
Today I have some fresh Titanium Bodies, Heads, and Tails to fit the popular E-series parts.
Made in USA from domestic 6Al4V titanium
Tails are E-series compatible
Tritium slots in bezel rings and tails fit 1.5 x 5.5mm vials
Mcclicky switch in tailcap with titanium button.
All parts fully o-ringed and protected from water intrusion.
2 piece body avoids thin area under head o-ring
There is a brass button installed at the head end to allow the use of flat top cells.
These heads accept a P60 drop-in.
They are designed to accommodate my Torch Lab Triple drop-in or a Malkoff drop-in
I make zero guarantees on the fit of any other drop-ins.
I have fit a few chinese drops into these, and the ones I have here fit fine.
The heads come with my Titanium crenulated bezel rings, UCL glass, and o-ring.
I have approached this split body design from my own direction. However, I would like to credit TB for pioneering this concept. (copied and edited from Precisionworks thread)
NOTE: this E-series split body concept is inspired by the efforts, design work & machining first conducted by Scott Thomson of TBSB (TranquilityBase). TBSB also designed & sold an 18650 non-split design that fit the E-series head with a C-series tail (circa 2005). Thank you Scott for your split body design that has withstood the test of time & will continue to be popular for many years to come.
This is a small run of parts.
There are only a couple of each style and size.
-----------------------------------------------------------------------------------------------------------------------------
Style 82 18350 body and tail $340
Style 82 18500 body and tail $350
Style 82 18650 body and tail $360
Slim tails are available for style 82
-----------------------------------------------------------------------------------------------------------------------------
Style 77 18350 body and tail $340
Style 77 18500 body and tail $350
-----------------------------------------------------------------------------------------------------------------------------
Style 44 18500 body and tail $350
-----------------------------------------------------------------------------------------------------------------------------
Style 510 18350 body and tail $340
Style 510 18650 body and tail $360
Slim tails are available for style 510
Head with bezel ring, UCL glass, o-ring $200
Available with purchase of body/tail assembly only.
I do not have any trits available at this time.
Parts ship with empty trit slots.
$10 Priority mail insured USA
$20 Priority mail Worldwide
Thank You for your support.
Last edited: