Battery question?

Candle Power Forums

Help Support Candle Power:

thornemi

Newly Enlightened
Joined
Feb 6, 2013
Messages
9
Hi. I have a solarstorm x2 bike light which has an 8.4v battery pack but after a recent tumble is now toast, I have a few 2s and 3s lipos kicking around,is either too out the voltage range of the led to use safely. Ta
 
2S LiPos should do the trick even better than original battery pack. Make sure you get the protection circuit for those packs, since you really don't want to overdischarge them (talking about fumes and flames)
 
Brilliant, thank you for your fast response, I do have a low voltage buzzer and the light has it integrated so should be ok.
 
Would be good as an upgrade but too heavy really. I have tried a 1000 mah 2s Lipo and it ran for 45 mins on medium power. My own lvc bleeped before the onboard one on the light bleeped. Does any one know why these bike lights have a 8.4 v battery, when a li I'll cell is 3.7 v

3.7 is kinda the average discharge voltage.
They charge to 4.2V, and thats the biggerest number the marketing team could get its hands on.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
2S LiPos should do the trick even better than original battery pack. Make sure you get the protection circuit for those packs, since you really don't want to overdischarge them (talking about fumes and flames)
- and if you do light them up - *NEVER* throw water on a lithium fire!!!! - burying it in sand is best.
 
Cheers for the advice, Hopefully I wont have any issues, I only use Overlander batteries, Review of the Solarstorm X2 to come shortly.
 
Back
Top