Sold/Expired custom blu-ray laser labby for sale

[mattmagic100]

Hey guys, newheitz and myself made a few custom phr labbys
and we wanted to see if they would sell.
they do burn things very well and the beam is very visible during the night.
they arent super professionally made
because they were made from a radioshack project box.
which if anyone has taken a good look at them, are kinda scratched up. but besides that the lasers look great, they work great, and everything is ready. all you need to do is stick 2, 14500 3.7v batteries inside.
(which you can get from modwerx).
unfortunately, there is no heatsink but the
cooling fan so far has been enough.
iv tested out the laser to go for 10min straight without being turned off and it barely got hot.
the laser will 170 shipped.
a free dust cap will be included,
and real quick instructions
(i know non of the pics have the laser actually powered up but i have made sure it works. but if anyone wants to see a pic or vid of it workin that cool just ask

)
3 available
they are set to 110mA
im not sure how many mW its puttin out cause i dont have a LPM
but, im pretty sure its easily 100mW

here are a few pics

http://i597.photobucket.com/albums/tt60/mattmagic100/DSC_0726.jpg
http://i597.photobucket.com/albums/tt60/mattmagic100/DSC_0727.jpg
http://i597.photobucket.com/albums/tt60/mattmagic100/DSC_0705.jpg
http://i597.photobucket.com/albums/tt60/mattmagic100/DSC_0706.jpg
http://i597.photobucket.com/albums/tt60/mattmagic100/DSC_0703.jpg

 

[mattmagic100]

any takers?

 

[karlthev]

Any beam pictures....?


Karl

 

[roguesoul]

This looks like it was super simple to construct. What is the cost of the parts and is there a schematic available? I might like to build one of these. Off topic: I love your Buell! I've got two of my own.

 

[Nos]

very poor heatsinking on it ...... you should add a tube arround the diode, so the fan can take the heat off

 

[mattmagic100]

This looks like it was super simple to construct. What is the cost of the parts and is there a schematic available? I might like to build one of these. Off topic: I love your Buell! I've got two of my own.

80 bucks to make. but since it took two of us we wanted to make some actual profit out of this.
haha thanks!

very poor heatsinking on it ...... you should add a tube arround the diode, so the fan can take the heat off

tube?
well since there is already glue around it, we cant add anything.
(super strong carpet glue)
and iv tested out if anything gets hot after 10 min straight without turning off the laser, and it stayed nicely cool.

 

[mattmagic100]

beamshots:

 

[mattmagic100]

all of them were taken at night.
second to last, i think had a flash?
i know the last one was with a flash.
but the second to last could have been a little bit of sun left.