Driver needed - High and Strobe only?

RoGuE_StreaK · Oct 1, 2013

Does anyone know of a cheapish driver (say sub $5) that only has High and Strobe? Closest I can find is High/Low/Strobe (eg Fasttech SKUs 1122302 or 1127403). Tried searching the usual suspects (DX, BG, FT) as well as CPF but didn't come up with anything.
Desired drive current is at minimum 1.5Amps, late 2's preferable (eg 2800mA)

kosPap · Oct 2, 2013

http://www.kaidomain.com/product/details.S020064
http://www.kaidomain.com/product/details.S020073
these are configurable...see the instruction on what star to bridge..there is also a memory off/on option

RoGuE_StreaK · Oct 2, 2013

Those look like some pretty sweet drivers, thanks for that kosPap! :thanks: Should do the job nicely, and flexible for other jobs too.
Hmm, wonder if you could wire up a DIP switch for the solder bridges for ultimate configurability... :thinking:

Changchung · Oct 2, 2013

RoGuE_StreaK said:
Those look like some pretty sweet drivers, thanks for that kosPap! :thanks: Should do the job nicely, and flexible for other jobs too.
Hmm, wonder if you could wire up a DIP switch for the solder bridges for ultimate configurability... :thinking:

I think the same time ago, expend like three hours searching about some SMD DIP switch with no luck...

I buy from kaidomain like a year ago ten drivers and request if their can program the chips under my need, their do it... Great site

Sent from my phone with camera with flash and internet on it... :D

Changchung · Oct 2, 2013

kosPap said:
http://www.kaidomain.com/product/details.S020064
http://www.kaidomain.com/product/details.S020073
these are configurable...see the instruction on what star to bridge..there is also a memory off/on option

This pics in the second url are mines... :D

Sent from my phone with camera with flash and internet on it... :D