*PLease Read the full thread.
Custom Titanium Bodies For the Nitecore EX10 internals.
You can see this thread for more info http://www.candlepowerforums.com/vb/showthread.php?t=208095
First, all of the fine print.
The lights will not work properly when used as a twisty. When you thread on the head, the light will come on, and you have to click to turn it off.
The light will work normally when using the piston as a pushbutton clicky.
Double click low, click press high, on-off, adjusting output, work as normal.
The slot in the piston was not machined correctly, and I take responsibility for that.
I will include the Ti piston at no charge. It still works OK. You could also use the stock piston if you wanted to.
Because these are a custom made part, there are no spares or extras, and no warranty is offered.
You will also void the warranty of your stock EX10 by putting the internal parts in this body.
With all that said.
These are Custom Made Titaium bodies that use the lens, orings, and light engine of the EX10.
They are made of 6AL4V Titanium. The head, body, piston, clip, and bezels are 6al4v.
Each Body for sale will include a body with clip attached, head, piston,and a standard bezel, and a crenulated bezel.
There are two finishes available.
17 "stonewashed" finish and >7 available.
30 regular finshed.>sold
Price will be $128 each.
Add $5 for usps shipping priority in usa Add $3 if you want insurance
International shipping will be $5 for standard shipping with no tracking or insurance. EMS will be $30
send paypal payment to [email protected]
*Please include your cpf username, what the payment is for and what finish you requested.*
Please post "I'll take one" along with finsh, in this thread to claim place in line. No pm's or emails.
YOU MUST POST IN THIS THREAD.
Again, there are
17 stonewashed finished
30 regular finish
My internet has been having problems the past couple of days, but I will keep track of this thread the best I can.
Now for some Pics
Custom Titanium Bodies For the Nitecore EX10 internals.
You can see this thread for more info http://www.candlepowerforums.com/vb/showthread.php?t=208095
First, all of the fine print.
The lights will not work properly when used as a twisty. When you thread on the head, the light will come on, and you have to click to turn it off.
The light will work normally when using the piston as a pushbutton clicky.
Double click low, click press high, on-off, adjusting output, work as normal.
The slot in the piston was not machined correctly, and I take responsibility for that.
I will include the Ti piston at no charge. It still works OK. You could also use the stock piston if you wanted to.
Because these are a custom made part, there are no spares or extras, and no warranty is offered.
You will also void the warranty of your stock EX10 by putting the internal parts in this body.
With all that said.
These are Custom Made Titaium bodies that use the lens, orings, and light engine of the EX10.
They are made of 6AL4V Titanium. The head, body, piston, clip, and bezels are 6al4v.
Each Body for sale will include a body with clip attached, head, piston,and a standard bezel, and a crenulated bezel.
There are two finishes available.
17 "stonewashed" finish and >7 available.
30 regular finshed.>sold
Price will be $128 each.
Add $5 for usps shipping priority in usa Add $3 if you want insurance
International shipping will be $5 for standard shipping with no tracking or insurance. EMS will be $30
send paypal payment to [email protected]
*Please include your cpf username, what the payment is for and what finish you requested.*
Please post "I'll take one" along with finsh, in this thread to claim place in line. No pm's or emails.
YOU MUST POST IN THIS THREAD.
Again, there are
17 stonewashed finished
30 regular finish
My internet has been having problems the past couple of days, but I will keep track of this thread the best I can.
Now for some Pics
Last edited:
With the regular finish. Paypal will be sent shortly.
