Hi Guys
For sale modded MG L-Mini:
-XPG R5 emitter
-SMO reflector
-Programmable driver
Driver functions:
* 3 mode Driver -modes can be changed by 1 or 2 clicks (configurable)
* Memory mode can be turn on/off
* Brightness settings: adjustment from 0.4 to 100%
- super-low mode (0.4% brightness )
- digital control of Fast-PWM)
- brightness settings on/off (configurable)
* No Flickering effect
* Automatic voltage control ( configurable):
- low battery voltage Warning (<3.05 V)
- moon-mode: power saving mode with reduced brightness (<2.9 V)
- discharge protection (<2.8 V)
* optional configurable strobe mode, can be switched on/off
If turned on, strobe mode available as a 4th mode
Control :
* Mode change: 1 or 2 clicks (configurable)
* Brightness : 3 clicks - mode brightness settings
* Driver configuration : 5 clicks - enters driver configuration mode:
1-click at high or low light selecting Yes/on (high), no/off (low)
+ Strobe mode on/off
+ 1 or 2 clicks mode change (yes/no)
+ Voltage control on/off
+ Memory on/off
+ Brightness settings on/off (if off then brightness regulation disabled)
canceling changes and exiting configuration mode automatically after 6 full cycles with no change
Driver made by Flagiusz, our local flashlight forum guru
$ 59 shipped
For sale modded MG L-Mini:
-XPG R5 emitter
-SMO reflector
-Programmable driver
Driver functions:
* 3 mode Driver -modes can be changed by 1 or 2 clicks (configurable)
* Memory mode can be turn on/off
* Brightness settings: adjustment from 0.4 to 100%
- super-low mode (0.4% brightness )
- digital control of Fast-PWM)
- brightness settings on/off (configurable)
* No Flickering effect
* Automatic voltage control ( configurable):
- low battery voltage Warning (<3.05 V)
- moon-mode: power saving mode with reduced brightness (<2.9 V)
- discharge protection (<2.8 V)
* optional configurable strobe mode, can be switched on/off
If turned on, strobe mode available as a 4th mode
Control :
* Mode change: 1 or 2 clicks (configurable)
* Brightness : 3 clicks - mode brightness settings
* Driver configuration : 5 clicks - enters driver configuration mode:
1-click at high or low light selecting Yes/on (high), no/off (low)
+ Strobe mode on/off
+ 1 or 2 clicks mode change (yes/no)
+ Voltage control on/off
+ Memory on/off
+ Brightness settings on/off (if off then brightness regulation disabled)
canceling changes and exiting configuration mode automatically after 6 full cycles with no change
Driver made by Flagiusz, our local flashlight forum guru
$ 59 shipped
Last edited: