kz1000s1
Enlightened
FS: P7 Modded Lights *New light*
For Sale: P7 modded lights, test run only. These are not lights
from my collection. These lights are carefully made for you with quality
parts. I"ve been doing mods since I joined this forum over 6 years ago,
now I need to put my hobby to work to pay some bills.
New Light!
(6) P7 Mag 2C setup for one 18650 Li-Ion battery (not included).
Ready to run.
Includes:
Black or Pewter(if available) Mag-lite 2C host (new)
P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.
Britelumens anodized heatsink, Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.
Spring for 18650 battery, soldered ground wire for lower resistance.
SOLD $75 shipped CONUS
(5) P7 Mag 1C setup for one 18650 Li-Ion battery (not included).
Ready to run.
Includes:
Black Mag-lite 2C host (new) cut and rethreaded to 1C size
P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.
Britelumens anodized heatsink, Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.
Spring for 18650, soldered ground wire for lower resistance.
Sold
(4) P7 2D Mag, battery adapter and tailcap mod for 3 C-cell Nihm
batteries (not included).
Mag-lite blue 2D host, new.
P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.
Britelumens prototype "deluxe" anodized heatsink, 2X the mass for
better heat dissipation. Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
$100 WITHDRAWN shipped CONUS
(3) P7 Mag 2C setup for one 18650 Li-Ion battery (not included).
Ready to run.
Includes:
Black Mag-lite 2C host (new)
P7 LED DSWNJ bin running direct drive, mounted w/Arctic Alumina epoxy.
Litemania anodized heatsink, Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.
Spring for 18650, soldered ground wire for lower resistance.
$80 SOLDshipped CONUS
(2) P7 Mag for 3 D-cell Nihm batteries (not included), can run on
alkalines with reduced output.
Mag-lite black 3D host, almost new. It was opened and sat in a drawer, hardly used.
P7 LED DSWNJ bin running direct drive, mounted w/Arctic Alumina epoxy.
Litemania anodized heatsink, Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
SOLD
(1) Like new River Rock 2C modded with a D-bin Seoul P7 and powered by one 18650 Li-Ion battery (battery not included).
The original reflector is modified to fit the P7 LED which is mounted on an
aluminum heatsink with Arctic Alumina epoxy and run by
direct drive. The 18650 battery fits perfectly in the provided adapter
sleeve. The sleeve is a light press fit in the tube and will not
fall out, but it's easily removable. The original spring has an extension to
reach the 18650 cell.
Light output in a ceiling bounce test is slightly less than a Mag 2C with a
direct drive P7, DX reflector and UCL lens. There is probably
some loss in output due to the heavy reflector texture and plastic lens. The
beam quality is very smooth with no clearly defined hotspot.
It's brighter in the middle and fades slightly to the edge somewhat like a
Surefire L4, but much brighter. An intense close up beam, but
not much throw, again, similar to an L4. There is no X or doughnut even at
one inch from a wall. After several minutes of running it gets
warm, but not too hot at the base of the head as long as you are
holding in your hand.
SOLD to Litefuse
P7 River Rock. The shed is about 60 ft. away.
P7 2C Mag-lite. All the light in the forground, the fence, and the tree on
the right is from the spill beam which looks a little brighter in person.
All lights include shipping to CONUS. Payment with Paypal (CC funding ok)
or USPS money order. Insurance is extra. International shipping might be
possible in some cases, PM me.
No trades please.
Availability:
Light #1 - Sold to Litefuse - Shipped
Light#2 - Sold to Waddup
Light#3 - Sold
Light#4 - Withdrawn
Light#5 - Sold to kavvika
Light#6 - Sold
For Sale: P7 modded lights, test run only. These are not lights
from my collection. These lights are carefully made for you with quality
parts. I"ve been doing mods since I joined this forum over 6 years ago,
now I need to put my hobby to work to pay some bills.
New Light!
(6) P7 Mag 2C setup for one 18650 Li-Ion battery (not included).
Ready to run.
Includes:
Black or Pewter(if available) Mag-lite 2C host (new)
P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.
Britelumens anodized heatsink, Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.
Spring for 18650 battery, soldered ground wire for lower resistance.
SOLD $75 shipped CONUS
(5) P7 Mag 1C setup for one 18650 Li-Ion battery (not included).
Ready to run.
Includes:
Black Mag-lite 2C host (new) cut and rethreaded to 1C size
P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.
Britelumens anodized heatsink, Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.
Spring for 18650, soldered ground wire for lower resistance.
Sold
(4) P7 2D Mag, battery adapter and tailcap mod for 3 C-cell Nihm
batteries (not included).
Mag-lite blue 2D host, new.
P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.
Britelumens prototype "deluxe" anodized heatsink, 2X the mass for
better heat dissipation. Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
$100 WITHDRAWN shipped CONUS
(3) P7 Mag 2C setup for one 18650 Li-Ion battery (not included).
Ready to run.
Includes:
Black Mag-lite 2C host (new)
P7 LED DSWNJ bin running direct drive, mounted w/Arctic Alumina epoxy.
Litemania anodized heatsink, Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.
Spring for 18650, soldered ground wire for lower resistance.
$80 SOLDshipped CONUS
(2) P7 Mag for 3 D-cell Nihm batteries (not included), can run on
alkalines with reduced output.
Mag-lite black 3D host, almost new. It was opened and sat in a drawer, hardly used.
P7 LED DSWNJ bin running direct drive, mounted w/Arctic Alumina epoxy.
Litemania anodized heatsink, Arctic silver paste between sink and body.
Modified Mag reflector, original finish.
Mil-spec teflon wiring, hard wired to switch.
SOLD
(1) Like new River Rock 2C modded with a D-bin Seoul P7 and powered by one 18650 Li-Ion battery (battery not included).
The original reflector is modified to fit the P7 LED which is mounted on an
aluminum heatsink with Arctic Alumina epoxy and run by
direct drive. The 18650 battery fits perfectly in the provided adapter
sleeve. The sleeve is a light press fit in the tube and will not
fall out, but it's easily removable. The original spring has an extension to
reach the 18650 cell.
Light output in a ceiling bounce test is slightly less than a Mag 2C with a
direct drive P7, DX reflector and UCL lens. There is probably
some loss in output due to the heavy reflector texture and plastic lens. The
beam quality is very smooth with no clearly defined hotspot.
It's brighter in the middle and fades slightly to the edge somewhat like a
Surefire L4, but much brighter. An intense close up beam, but
not much throw, again, similar to an L4. There is no X or doughnut even at
one inch from a wall. After several minutes of running it gets
warm, but not too hot at the base of the head as long as you are
holding in your hand.
SOLD to Litefuse
P7 River Rock. The shed is about 60 ft. away.
P7 2C Mag-lite. All the light in the forground, the fence, and the tree on
the right is from the spill beam which looks a little brighter in person.
All lights include shipping to CONUS. Payment with Paypal (CC funding ok)
or USPS money order. Insurance is extra. International shipping might be
possible in some cases, PM me.
No trades please.
Availability:
Light #1 - Sold to Litefuse - Shipped
Light#2 - Sold to Waddup
Light#3 - Sold
Light#4 - Withdrawn
Light#5 - Sold to kavvika
Light#6 - Sold
Last edited: