PhotonFanatic
Flashlight Enthusiast
Specially hardcoated (HAIII) Copper Colored Groovy for sale:
6061AL with HAIII copper color anodizing, 2.3 oz. with battery installed
Uses RCR123 battery (not included)
17mm smooth Khatod reflector
Kroll switch
1mm thick Luxar lens with double-sided AR coating
BitZ Driver--Specs:
PRICE: $180, was $190. First Class USPS shipping included (uninsured); foreign orders, please add $2 foreign fee.
Cash PayPal to: paycashpal (at) photonfanatic.com
Credit PayPal to: fanatic (at) photonfanatic.com
First, "I'll take it," gets it.
Thanks.
6061AL with HAIII copper color anodizing, 2.3 oz. with battery installed
Uses RCR123 battery (not included)
17mm smooth Khatod reflector
Kroll switch
1mm thick Luxar lens with double-sided AR coating
BitZ Driver--Specs:
- LED : SSC P4 bin - USXOH
- Driver : Highly efficient Buck-Boost converter with 3 regular brightness levels and 4 hidden signals.
- Battery : One 3V CR123A or one 3.6V RCR123A (recommend AW's protected Li-Ion cell)
- BitZ driver use a highly efficient Buck-Boost converter and it will control power to the LED even though you use 3.6V rechargeable Li-Ion battery. So, the LED will not be damaged by unregulated high current from Li-Ion battery. Of course, brightness with a regular 3V CR123A or a 3.6V rechargeable Li-Ion battery will be same.
- Input voltage range : 1.8V ~ 5.5V
- There are three basic brightness levels (Medium-Low-High) and four hidden signals (Strobe-Locating-Extreme Low-S.O.S.)
- Brightness (estimated) : High (120~130 lumen), Medium (30~40 lumen), low (10 lumen)
- Current to LED (tested) : High (500mA), Medium (150mA), Low (30mA)
- Runtime (tested) : High (1~2 hours), Medium (3~6 hours), low (12~24 hours) depending on 3V or 3.6V.
- Runtime for signal mode (tested by CR123A) : Strobe (7 hours), Locating (36 hours), Ext. Low (70 hours), S.O.S. (3 hours)
- Basic three brightness levels has a Memory Function. You will get next level by Off and On within two seconds.
- You will get into Signal mode by 8 consecutive On and Offs. No memory function in Signals.
- Locator signal : useful mode for tracking and camping as "follow me" signal or location signal.
- Extreme Low: This mode is useful as a overnight candle while tenting. Current to LED is 10mA.
PRICE: $180, was $190. First Class USPS shipping included (uninsured); foreign orders, please add $2 foreign fee.
Cash PayPal to: paycashpal (at) photonfanatic.com
Credit PayPal to: fanatic (at) photonfanatic.com
First, "I'll take it," gets it.
Thanks.
Last edited: