Help finding a good thrower

Candle Power Forums

Help Support Candle Power:

harrycolez

Newly Enlightened
Joined
Oct 10, 2013
Messages
43
1) How would you prefer to purchase the light?
____This will be mail-order or Online (location doesn't matter).

2) Budget: An easy question, but you may change your mind after answering the rest! :-)
____I don't know yet____Up to $100.

3) Format:
____I want a flashlight (hand held/self contained).

4) Size:

____SMALL - Every day carry (4-7 inches).
____MEDIUM - Holster/belt ring carry. (>7 inches)

5) Emitter/Light source:
____LED (known for efficiency, longevity, and compactness)

6) Manufacturer:
____I want to buy a light from a large/traditional manufacturer that is ready to go out of the box.
____I would like a light from a specialty manufacturer (Possibly limited run/Custom).

7) What power source do you want to use?

____I intend to use Rechargeable cells based on less common formats (18500 or 18650 Li-Ion, RCR123, et-al).

8) How much genuine out the front (OTF) light do you want/need? Sometimes you can have too much light (trying to read up close up with a 100 lumen light is not a happy experience).
____I want search and rescue type illumination (800+ lumens).

9) Flood vs Throw: Flood covers an area, Throw reaches out to a distance.
____Wide Throw: I want a beam with a noticeable hot-center for distance throw and a significant amount of "side-spill". Good for rough trail hiking, search and rescue, and general distance work.
____Narrow Throw: I want a beam with a very tight "hot center" and minimal "side-spill". Good for distance viewing, fog, and looking through dense undergrowth.

9a) Distance: How far away will you typically need to see with this light (check all that apply)
____50-150 yards/meters (I live in a very rural area/farm with wide open spaces)

10) Runtime: Not over-inflated manufacturer runtime claims, but usable brightness measured from first activation to 50% with new batteries (Measured on maximum continuous output).
____90-120 minutes (Runtime is moderately important, but still not critical)

11) Durability/Usage: Generally the old phrase “you get what you pay for” is very accurate for flashlights.
____Very Important (Camping, Backpacking, Car Glove-box).

12) Switch Size, Type, and location (choose all that apply):
____Any size switch will do.____I want a forward clicky (Helpful for momentary activation and signaling).
____I want a reverse clicky (For use with multi-mode/level lights).
____I want a body mounted switch (near the head, like on a Maglite).
____I want a tail mounted switch (found on the majority of today’s high end lights).

13) User Interface (UI) and mode selection. Select all that apply.
____I don’t care.

14)Material/Finish/Coating

____Anodized Aluminum – either type II or III (Hard Anodized) (Aluminum, specifically HA, is the most common material/finish for today’s higher end flashlights).

15) Water resistance
____IPX7 (Waterproof to 1 meter/30min)
____IPX8 (Submersible to greater than 1 meter for 4 hours)

16) Storage conditions
____In house (temperature/climate controlled environment)


I am looking for a 2x18650 light. I have looked mostly at the Armytek Barracuda and Crelant 7g5cs and the T45Cvn and am leaning toward the 7g5cs.
If anyone has other recommendations I am open to suggestion. Or if anyone knows how well the T45Cvn throws and if it steps down on high I am curious.Thank you for your time
 
Back
Top