I need a EDC flashlight

Candle Power Forums

Help Support Candle Power:

KB3UBW

Newly Enlightened
Joined
Jun 7, 2012
Messages
10
For all questions please select all that apply.


1) How would you prefer to purchase the light?

____I would like to purchase the light from a brick and mortar store. I am located in ______________.
__X__I will be mail-ordering or buying online, so this doesn't matter.


2) Budget: An easy question, but you may change your mind after answering the rest! :-)

____Less than $25.
____Less than $50.
__X__Less than $100.
____Less than $150.
____Less than $300.
____I have no limit.
____I’m flexible, tell me what you gotJ.
____Other, please specify ________


3) Format:

__X__I want a flashlight.
____I want a headlamp.
____I want a lantern.
____I want a dive light.
____I want a portable spotlight.


4) Flashlight-specific format/size:

____Keychain size.
____Every day carry small (2-4 inches).
__X__Every day carry medium (4-7 inches).
____Holster carry.
____Big enough to need its own travel caseJ.
____I don’t care.
____I don’t know.
____N/A


5) Emitter/Light source:

__X__LED (known for efficiency, longevity, and compactness)
____Incandescent (known for superior color rendition)
____HID (known for max output, but often at the expense of size)
____I don't know.


6) Manufacturer:

__X__I want to buy a light from a traditional mass producing manufacturer that is ready to go out of the box.
__X__I would consider getting a light that is pieced together (for example a “host” or flashlight body from one manufacturer, and a “drop-in” emitter from another source). Under the right circumstances, this path can provide more options to the consumer to meet specific needs, and can often be easily upgradeable as technology improves.


7) What battery type do you want to use?

____I intend to use alkaline batteries (AAA, AA, C, D) (disclaimer, while it does not preclude all choices, these are not recommended for many of today’s most powerful lights)
____I intend to use rechargeable nickel chemistry (NiCad, NiMH, NiZn)
__X__I intend to use lithium primary batteries (CR123, CR2, Energizer Advanced/Ultimate Lithium AA/AAA)
__X__I intend to use rechargeable lithium (li-ion) chemistry. Feel free to specify a size if you know which size you want (14500, RCR123/16340, 17500, 17670, 18650, etc.)
____I want a light with an integrated rechargeable battery. (Note: these choices may be very limited unless you are looking at spotlights)


8) How much genuine out the front (OTF) light do you want/need? Sometimes you can have too much light (trying to read up close up with a 100 lumen light is impossible).

____I want to navigate a dark room or read a map (0-10 lumens).
____I want to walk around an unlit rural area (50-150 lumens).
__X__I want to illuminate my entire backyard or a campsite (150-300 lumens).
____I want to illuminate an entire field, the neighbor's front yard several houses down, impress my friends and neighbors, etc. (300-700 lumens).
____I want ridiculous amounts of lumens (800+ lumens).


9) Throw vs. Flood: At what distance will you be most likely to use this light? Select all that apply.

____Less than 1 yard/meter (reading, other close work)
__X__Less than 5 yards/meters (looking for something inside a dark shed/garage/basement)
__X__5-20 yards/meters (check out a noise in the backyard)
__X__30-50 yards/meters (I have a big backyard)
____50-150 yards/meters (I live in a very rural area/farm with wide open spaces)
____150+ yards (I want maximum throw possible)


10) Runtime: Not over-inflated manufacturer runtime claims, but usable brightness measured from first activation to 50% with new batteries (Measured on maximum output).

____Up to 30 minutes (I want the brightest [and potentially smallest] light for brief periods)
____30-60 minutes (I have plenty of batteries just ready to be changed)
__X__90-120 minutes (Runtime is moderately important, but still not critical)
__X__3 hours + (I critically need this light to run on max for extended periods in between battery changes/charges).


11) Durability/Usage: Generally the old phrase “you get what you pay for” is very accurate for flashlights.

____Not Important (A “night-stand” light).
____Slightly Important (Walks around the neighborhood).
__X__Very Important (Camping, Backpacking, Car Glove-box).
____Critical (Police, Fire, Search & Rescue, Caving, Survival).
____I don't care.
____I don’t know.


12) Switch Type and location (choose all that apply):

__X__I want a forward clicky (Helpful for momentary activation and signaling).
____I want a reverse clicky (For use with multi-mode/level lights).
__X__I want a momentary switch (Predominantly for use with signaling and short bursts of momentary light only).
____I want a twisty switch (Tighten the head/tailcap to activate, and the light will stay on until the head/tailcap is loosened).
____I want a body mounted switch (near the head, like on a Maglite).
__X__I want a tail mounted switch (found on the majority of today’s high end lights).
____I don't care.
____I don’t know.
____Other, please specify____________________.


13) User Interface (UI) and mode selection. Select all that apply.

____A simple on-off with only one output level is fine for me.
____I want 2 light levels. (Brighter/short runtime and Dimmer/long runtime.)
__X__I want multiple light levels. (Some lights have 5-16 light levels.)(I want at least 3-4 brightness levels)
____I want a programmable light.
____I want a selector ring.
____I want a strobe mode. (Blinks to show location.)
____I want SOS mode.
____I want a beacon mode.
____I don’t care.
__X__I don’t know.


14)Material/Finish/Coating

__X__Plastic/composite body (this may limit your choices significantly).
__X__Anodized Aluminum – either type II or III (Hard Anodized) (Aluminum, specifically HA, is the most common material/finish for today’s flashlights).
____Stainless steel (durable, but much heavier than aluminum)
____Titanium (durable and nearly as lightweight as aluminum, but can be moderately to significantly more expensive).
____I don’t care.
____I don’t know.
____Other, please specify____________.


15) Special Needs/extras: Is there anything else you want or need that hasn't been mentioned? Select any below.

____Red filter (for preserving night vision).
____Other filter colors (Amber, Green, Blue, _________).
____Dedicated R/G/B secondary LEDs.
____“Hybrid” light (bright incandescent combined with long running LEDs)
__X__Pocket/belt clip
__X__Holster
____Wrist/Neck Lanyard
__X__Crenulated bezel
____Non-sparking Intrinsically Safe (IS) for use in explosive environments



Any and all help is appreciated, if yall have anymore question let me know and I will do my best to answer.


KB3UBW...
 
What use were you getting this light to perform for you?

Would it matter to you if it came on in high, and you then adjusted it if you didn't want it on high...or do you need to be able to turn it on at a low light level?
 
What use were you getting this light to perform for you?

Would it matter to you if it came on in high, and you then adjusted it if you didn't want it on high...or do you need to be able to turn it on at a low light level?



1. I will be using mainly for dog walking, as well as backpacking and EDC use.
2. nope it doesn't matter either way

 
I'd suggest a JETBeam RRT-21. You'll have to buy a holster for it though. I had a maxpedition that fit like a glove, but can't remeber which one it was. Here's a video review ...





Good luck!
 
The Sunwayman V10R (XM-L T6) is a great EDC light, I've carried it for over a year, wouldn't want anything else. It's compact, feels good, has a clicking tail cap, and a magnetic control ring to adjust your brightness anywhere from 1-~460 (using an RCR123 or 18340 battery). Also it has an AA extender that can be purchased for about 20$, and then it will run with AA's or 14500.

Plus you can get a 5% discount on BatteryJunction if you use the CPF discount code cpf2011, if I'm not mistaken it still works.

Links removed from quotes.

Something like 92.09$ (with discount code used) before shipping for the light and extender, pretty damn good deal. Hope this helps!

it looks good, and by the way you can get it on amazon for about $75, do you have any experience with the v11r? just wondering if its worth the extra cash...
 
Last edited by a moderator:
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
1. I will be using mainly for dog walking, as well as backpacking and EDC use.

I use a Quark X run on a 1xAA tube with 14500 Li-ion for the same primary reasons. I find a 200+ hour/1xAA moonlight mode to be critical for camping (mine runs continuously at night for days/weeks) and EDC emergency use, not to mention the ability to cannibalize any AA/AAA from anything/anywhere. Great for those discrete times your dog wants to do his business on neighbor's lawns. 280 lumen high ain't bad, but I always favor the battery conserving lower modes.

Not a fan of variable magnetic rings that have an overhead electrical draw often maxing runtimes ~ 35 hrs, incl sub lumen levels, but their UIs seem pretty cool.... just not for camping or emergency use. YMMV
 
I use a Quark X run on a 1xAA tube with 14500 Li-ion for the same primary reasons. I find a 200+ hour/1xAA moonlight mode to be critical for camping (mine runs continuously at night for days/weeks) and EDC emergency use, not to mention the ability to cannibalize any AA/AAA from anything/anywhere. Great for those discrete times your dog wants to do his business on neighbor's lawns. 280 lumen high ain't bad, but I always favor the battery conserving lower modes.

Not a fan of variable magnetic rings that have an overhead electrical draw often maxing runtimes ~ 35 hrs, incl sub lumen levels, but their UIs seem pretty cool.... just not for camping or emergency use. YMMV
sounds great, but is it a reverse clicky or a forward clicky?
 
Yeah, sorry reverse clicky... they make a tactical version with forward clicky, but only 2 of 8 modes are readily accessible without reprogramming. If you want a multimode along with a forward clicky, then you'll probably have to go with a 2 button, or button and knob or something. Single forward clickies and multi modes are a tough combination.
 
It doesnt matter what UI it has, but I need a forward clicky for momentary use. As a side note I would prefer AA's as the power source so if I need to I can scavenge batteries from other sources.
 
Back
Top