Improved Raw Kit
- Thread starter orb
- Start date
Roboholic
Enlightened
Hello Rob,
Have you seen this thread http://www.candlepowerforums.com/vb/showthread.php?t=114471
I was going to send a body to them to see how the HA3 would look.
Roboholic
Have you seen this thread http://www.candlepowerforums.com/vb/showthread.php?t=114471
I was going to send a body to them to see how the HA3 would look.
Roboholic
Yes thanks, I have just had a look. We are sending samples to our local anodizer soon. I have had a head ache with anodising in the past so not that keen on reliving the experience. I also think that bare aluminium is the best colour for aluminium :thinking:
Regardless we will try some samples.
BTW the Reason I do the Raw Ns & Ti's is for the user who requires a harder wearing product with out the need for other finishing methods.
Regardless we will try some samples.
BTW the Reason I do the Raw Ns & Ti's is for the user who requires a harder wearing product with out the need for other finishing methods.
Yes, received all my clips (two each, in three sizes) but still waiting for arrival of my Raw NS...:popcorn:
TENMMIKE said:all http://www.berkeleypoint.com/index.html stuff is the top of the line but you'll pay for it , they are fast shippers and like i said if they sell it , it the best that can be got. their little clips are superb like these in orbs pic
D MacAlpine
Newly Enlightened
Is there any chance of asking for an upgrade to a "U" bin for the appropriate consideration? (I am right in thinking that all the current run are "T" bin as standard, aren't I?)
Don
Don
Trashman
Flashlight Enthusiast
That statement about the PRCR2 giving 20 minutes on high before cutoff...does that refer to the 1w version? I haven't been keeping up (well, just a little) on all the RAW biz, but the last I remember, we were gettin' 12 minutes per charge. Have the numbers changed now that protected cells are available?
Yes we can offer UWOJ or UXOJ thanks to Photonfantic for £6 extra.D MacAlpine said:
Or as you say the TWAJ as standard.
Trashman: The PRCR2's arw 350 MaH & do give 20 mins before cut of on high.
7-8 hours on Low.
D MacAlpine
Newly Enlightened
orb said:
Damn! Now I've got to have one, how do I order the upgrade?
Hi,
A few questions re UWOJ/UXOJ verses the standard TWAJ:
I understand that U bin gives greater brightness (~100 lumens), but what is the effect of U bin on:
run time?
operating temperature?
Apart from brightnesss, how do the UWOJ & UXOJ differ from the TWAJ?
TIA,
A few questions re UWOJ/UXOJ verses the standard TWAJ:
I understand that U bin gives greater brightness (~100 lumens), but what is the effect of U bin on:
run time?
operating temperature?
Apart from brightnesss, how do the UWOJ & UXOJ differ from the TWAJ?
TIA,
D MacAlpine
Newly Enlightened
Hi Bright,
Welcome to the world of Luxeon bin codes!
Have a look at this for a full explanation, http://home.comcast.net/~theledguy/bin_codes/index.htm
Since both are ***J luxeons the power consumption/runtime and operating temperature should be the same, the U bin is more efficient at producing light.
The middle two letters are the tint and that's a whole world of personal preference.... (for what it's worth X0 & W0 are apparently the whitest tints available, with WA being a "warm white").
Hope that helps, have fun reading through the dozens of threads on the subject.
Don
Welcome to the world of Luxeon bin codes!
Have a look at this for a full explanation, http://home.comcast.net/~theledguy/bin_codes/index.htm
Since both are ***J luxeons the power consumption/runtime and operating temperature should be the same, the U bin is more efficient at producing light.
The middle two letters are the tint and that's a whole world of personal preference.... (for what it's worth X0 & W0 are apparently the whitest tints available, with WA being a "warm white").
Hope that helps, have fun reading through the dozens of threads on the subject.
Don
D MacAlpine
Newly Enlightened
lightrod said:
So many Raw Orb Threads so little Time :ohgeez: again.
So long as we can get hold of U bins with good colour tint & low ish VF then Yes.
We have UWOJ & UXOJ From Photonfanatic (:thanks:)
We charge £6 extra for a U bin of choice on the Raw & Raw Ns.
So long as we can get hold of U bins with good colour tint & low ish VF then Yes.
We have UWOJ & UXOJ From Photonfanatic (:thanks:)
We charge £6 extra for a U bin of choice on the Raw & Raw Ns.
EvilLithiumMan
Enlightened
I ordered a Raw Orb on the 4th of July. Based on some of the posts I've read, I was expecting it to arrive to 10 to 14 days. But it is here today - only six days since the order was placed. And it is great! What a treasure. What a joy to operate and admire - and I'm just talking about the plastic shipping tube :)
Rob, thanks for a superb product and service!
OK, so why did I puchase a Raw Orb when the Orb NS garners more recommendation? The RCR2 cell has protection. It has greater capacity. If needed, I can always toss in a standard CR2 cell.
How bright is it? Plenty bright. Is it 77 lumens bright? Hmm, I can't really tell. It is definitely brighter than my HDS B42GTXR. And at first I thought it was whiter than the HDS, but I think now the increased brightness makes it seem whiter. Neither light has any tint. Just pure snow white.
Any regrets? Well, I learned too late what was needed to be done to get a U bin device. I guess I would have preferred it, but this T really rocks.
[Start Of Rant]
"Tritium? We don't got no tritium. We don't need no tritium. We don't got's to show you no stinkin' tritium!"
Really, what a gimmick. I can't imagine a true CPF'er needing tritium to find a flashlight. Doesn't everyone know where all 87 of their lights are every second of the day? I know I do. I just don't get it.
Tritium? Bah! Humbug!
[End Of Rant]
Rob, thanks again. Your product and service are second to none.
Rob, thanks for a superb product and service!
OK, so why did I puchase a Raw Orb when the Orb NS garners more recommendation? The RCR2 cell has protection. It has greater capacity. If needed, I can always toss in a standard CR2 cell.
How bright is it? Plenty bright. Is it 77 lumens bright? Hmm, I can't really tell. It is definitely brighter than my HDS B42GTXR. And at first I thought it was whiter than the HDS, but I think now the increased brightness makes it seem whiter. Neither light has any tint. Just pure snow white.
Any regrets? Well, I learned too late what was needed to be done to get a U bin device. I guess I would have preferred it, but this T really rocks.
[Start Of Rant]
"Tritium? We don't got no tritium. We don't need no tritium. We don't got's to show you no stinkin' tritium!"
Really, what a gimmick. I can't imagine a true CPF'er needing tritium to find a flashlight. Doesn't everyone know where all 87 of their lights are every second of the day? I know I do. I just don't get it.
Tritium? Bah! Humbug!
[End Of Rant]
Rob, thanks again. Your product and service are second to none.
Frank Maddix
Newly Enlightened
Rob,
Hope you had a good holiday.
A quickie - before I order a new top & bottom for my Raw, is it straightforward to swap the PCB / lens?
Cheers
Hope you had a good holiday.
A quickie - before I order a new top & bottom for my Raw, is it straightforward to swap the PCB / lens?
Cheers
Rob,
Will purchasing just the top side (lens side) and attaching it to the old Raw bottom side work? By work I mean giving it the added turns to separate the two halves and also giving it room to add the thicker UCL?
Will purchasing just the top side (lens side) and attaching it to the old Raw bottom side work? By work I mean giving it the added turns to separate the two halves and also giving it room to add the thicker UCL?
Latest posts
-
-
-
-
-
-
For Sale - Flashlight Tactical NYX SunDrop- Latest: K2-bk-bl-rd
-
-
-
