Just received cle v.2 and have some questions.

[sphynx_000]

First, here are my impresions if anyone is interested,

-The light is a smaller than I expected but am getting used to the size.

-This is my first high-powered led light, and I think I was expecting a little much at first. However, once I was able to test it outside... the amount of light it casts is really pretty amazing for its size. Although the output does not blow my mind, it is a quite usefull beam (both spill and throw). Add to that around 100 mins on a AA, and I am more than satisfied.

-I like the interface, and the sequence of levels/modes. There is plenty of time to switch modes, and I actually like the blink it does when a mode is "memorized".


Now for the questions,

-I have cleaned my threads but it is still far from smooth. I need to get some kind of lube to the threads or o-ring. Is there anything I could use that could possibly be found around the house?

-Also the battery shakes around when the light is not turned on. What is the easiest fix for that?

 

[chrome-addict]

As far as lubing the threads, I really like Nyogel. It seems to work better than anything else I've tried. If you don't have any Nyogel, silicone paste/grease works pretty well. Try to stay away from vaseline ...it contains petroleum which can be hard on the rubber o-ring.

I used a paper sleeve inside the tube to take up the extra space. Some people just use a post-it or low-stick masking tape applied directly to the battery itself.

BTW my V1.2 also has rough threads, and the o-ring binds pretty bad.

 

[sphynx_000]

I thought my threads are pertty decent after I got them cleaned out real good. But my o-ring does bind also.

I really need to get some grease and possible a differnent o-ring to get the light turning freely.

 

[chrome-addict]

Silicone grease works decent, but Nyogel 760g works fantastic ...makes the threads feel buttery smooth. The o-ring still binds, thus you're still plagued with the rotational resistance. I think a slightly thinner o-ring just might be the ticket!

 

[sphynx_000]

Where could I pick up Nyogel locally?

 

[sphynx_000]

Bump,

Anyone know where I could pick up some Nyogel?

Or is the internet my best choice?

 

[NetKidz]

Anyone know where I could pick up some Nyogel?

Lighthound?
http://www.lighthound.com/index.asp?PageAction=VIEWCATS&Category=186

I didn't buy them because of the high int'l shipping charge outside the US.

 

[Nake]

Anyone know where I could pick up some Nyogel?

One of our members sells it.

http://www.candlepowerforums.com/vb/showthread.php?t=162148

 

[Steve L]

Where could I pick up Nyogel locally?

Don't know about locally, but Matt at Battery Junction has it. http://www.batteryjunction.com/nyogel-760g.html

 

[sphynx_000]

thanks,

It looks like I will just have to order some.

 

[kwando]

where did you pick up the L-CE V2 at?>

 

[sphynx_000]

right here,

http://emilionworkshop.com/oscommerce/catalog/product_info.php?cPath=1_57&products_id=154&osCsid=0b223fe6da7a9be96d610a4d6ac3e01f