L4 rattle?

  • Thread starter Thread starter RH
  • Start date Start date
Candle Power Forums

Help Support Candle Power:

RH

Enlightened
Joined
Dec 27, 2003
Messages
316
I just got my first SureFire (an L4) and notice that a rattle can be heard drom the head. Is something loose or is this just the way they are?

Thanks,
Robert
 
Robert, I too just got an L4 (yesterday) and I don't hear any rattle. Sometimes if you tap the body just right, you can hear/feel a vibration from the clip, but that's pretty much it. Do you have the bezel screwed on all the way??
 
My KL4 doesn't rattle at all. I do get some rattle though from the body (I'm not sure if it's the batteries or clip, but that doesn't really matter).
 
I have a L4 now for about half a year and there is nothing like rattling. Also if you heavily shake it you cannot hear anything rattle especially not the batteries ! I would have mine sent in to Surefire and have it checked.

-Norbert
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Robert,

Is it a brand-new boxed L4?
That did this right out of the box?
Does it have the current (new to those who don't have it) body style?

One of my KL4's rattles but continues to function but it's one of the first (or perhaps even the first) I had. I suggest contact SureFire and arrange to have it replaced. I've not done so with mine because I can't really be bothered since it still works no worries.

Al
 
It is the newest one with the new box and body style taken out of a sealed box. I know it is the bezel ecause I took the bezel off and just shook that and it made the rattle. Are there any parts there I could tighten up?

Thanks,
Robert
 
If it was any component other than your bezel, I wouldn't worry about it. However, the bezel is the brains of the operation, and without some risk of catastrophic failure it cannot be worked on. It is screwed, glued, aligned, etc. I am very handy, but it scares me to death thinking about dismantling a bezel! I strongly suggest a call to SureFire. You can't go wrong with this.......
 
Back
Top