I dropped my trustfire 1200lm on the floor and now its stuck on the mode LOW it has five modes high medium low strobe sos i have changed the batteries with fresh ones i have tested the tailcap with a wire from the battery to the frame it turns on but still low can anyone help me with this issue!! please thanks
NEED HELP with light
- Thread starter earlgould
- Start date
brted
Enlightened
Doesn't sound good. May need a new driver if something on the circuit board is damaged.
HotWire
Flashlight Enthusiast
- Joined
- Mar 9, 2011
- Messages
- 1,651
Start with a good cleaning of threads & contacts. Then be sure the switch ring is tight (use tweezers/small long-nose pliers). You could try reflowing the solder on all the joints you can find. I had a similar light that never worked & DX would not answer my emails. I bought another dropin and it works fine. I use it all the time.
