Noob question: Will this combo...

[grecomfs]

assemble, along with 2 18500 batteries, to form a working light? Is there anything else needed?


[TABLE="width: 100%"]
[TR]
[TD="class: tdcartOdd, align: center"]http://www.oveready.com/skins/Carreta-lingerie_charcoal/styleImages/del.gif[/TD]
[TD="class: tdcartOdd, align: center"][/TD]
[TD="class: tdcartOdd, align: center"]http://www.oveready.com/images/uploads/thumbs/thumb_Moddoolar%20Hero.jpg[/TD]
[TD="class: tdcartOdd, align: left"]Moddoolar DB Cell Tube (34-130mm) - Black HA
Body Size: 8. DB 100mm (2x18500)
Compatibility: 1. Moddoolar Heads Only[/TD]
[TD="class: tdcartOdd, align: center"]TL-DB-Tube-BK/100[/TD]
[TD="class: tdcartOdd, align: center"]18[/TD]
[TD="class: tdcartOdd, width: 80, align: center"]$55.00[/TD]
[TD="class: tdcartOdd, width: 80, align: right"]$55.00[/TD]
[/TR]
[TR]
[TD="class: tdcartEven, align: center"]http://www.oveready.com/skins/Carreta-lingerie_charcoal/styleImages/del.gif[/TD]
[TD="class: tdcartEven, align: center"][/TD]
[TD="class: tdcartEven, align: center"]http://www.oveready.com/images/uploads/thumbs/thumb_TriadBrass.jpg[/TD]
[TD="class: tdcartEven, align: left"]Moddoolar C Triad Tail - Hand Polished Brass
Stainless Clip: 2. Long Silver Belt Clip
Tail Switch: 5. McClicky - Black MEDpress
Xtra Boot: 0. No extra boot[/TD]
[TD="class: tdcartEven, align: center"]C-Triad-Br[/TD]
[TD="class: tdcartEven, align: center"]2[/TD]
[TD="class: tdcartEven, width: 80, align: center"]$118.00[/TD]
[TD="class: tdcartEven, width: 80, align: right"]$118.00[/TD]
[/TR]
[TR]
[TD="class: tdcartOdd, align: center"]http://www.oveready.com/skins/Carreta-lingerie_charcoal/styleImages/del.gif[/TD]
[TD="class: tdcartOdd, align: center"][/TD]
[TD="class: tdcartOdd, align: center"][http://www.oveready.com/images/uploads/thumbs/thumb_Triple3.jpg[/TD]
[TD="class: tdcartOdd, align: left"]TorchLAB H3 H/M/L Triple - Three Level Drop In (1600L)
Light Engine: Triple H3 HML Neutral XPG2
Z32 Fitting Ring: 0. None (Z44 bezels)[/TD]
[TD="class: tdcartOdd, align: center"]Triple-H3-HML[/TD]
[/TR]
[/TABLE]


Thanks in advance.


Image tags removed see Rule #3 Do not Hot Link images. Please host on an image site, Imageshack or similar and repost – Thanks Norm

 

[LowFlux]

You need a bezel for the drop in. http://www.oveready.com/a-parts/bezels/cat_24.html You also will need a C-series or M-series adapter for the Moddoolar tube (depending if you go for a 6P/C2 bezel or a M2 bezel).

 

[euroken]

Just to make sure, M2 and 6P/C2 uses same c series adapter. You won't need the M series adapter since the drop in you selected wont work in M series light such as Surefire M3 or M6. Will work in M2 but you will want the fitting ring with M2.

Good luck.

 

[RI Chevy]

You could always purchase one of his bored Surefire 9P's. They usually come with a bezel and tail cap. Then you could install your drop in. Just an option for you.