Output of Quark AA R5 vs D10 SP R2

CalgaryGuy

Enlightened
Joined
Sep 23, 2003
Messages
501
Location
Alberta, Canada
Does anyone know the output of the Quark AA R5 compared to the D10 SP R2 for both Ni-Mh and 14500?

I like the accessories for the D10 but I also want an R5 light...
 
The Quark AA is listed at 4sevens.com as 109 lumens out the front. The D10 SP R2 is listed at 145 lumens. I don't own any Nitecore lights and I'm not 100% sure, but I think that Nitecore lists emitter lumens. If that's correct, then max output will be roughly the same.
 
But where can you get a D10 SP? 4sevens site shows it is out of stock.

I belive that got the link from one of the above CPF advertisement banner, it went to the Nitecore's web site. I tried to get it again but it doesn't seem to get to that banner for me.

Also, if you seach for "D10 SP" in ebay, it should have a few retailer that carry that light.
 
The Quark AA R5 will probably be sliiightly brighter, but it won't be much of a difference. The big difference will be in beamshape. The XP-G in the Quark will be more floody, with a large hotspot. The D10 will be a bit more focused of a beam.

This beamshape will probably make the D10 appear a bit brighter if you confuse lumens and lux, but the big, bright, floody beam of the Quark is very useful for close-up to medium range work.

Both good choices though... output is good enough on both of them that it comes down more to personal preferences for UI, beamshape, etc.
 
I have an EX10 SP R2 and I would think the circuit is the same as the D10. With an RCR123 my lightbox shows 145lm. My Quark AA R5 shows 205lm with a 14500.
 
Top