Pi Projects presents Ninja mini light for sale. This will be a limited edition of no more than 30 each of copper and brass (copper Ninjas are sold out). Please take a few minutes to read thoroughly before making any purchases.
.
Ninja Specs:
Brass hosts with deep etching of a dragon and 忍者 (Ninja in Japanese)
Newest and the brightest XP-G2 emitter; S4, 2C (cool white, 5700K, slightly yellow in tint)
Scratch resistant sapphire glass
SMO aluminum reflector w/ 16 degree beam angle
Operating on a single Li-ion 10220 rechargeable battery
Dimensions: 16 x 50 mm or 0.64 x 2"
Weight: 48 grams or 1.7 oz. w/o battery
One slot for tritium locator of 3 x 16 mm, viewable from five sides.
5mm hole for Paracord/triangle ring
UI:
Two-stage control:
- Turn to control on/off
- 0 to around 60% of power, variable brightness via QTC control
- Around 60% of power, system ramps up to max output.
QTC pill double-protection:
1. No direct contact between battery and QTC pill.
2. Anti-squashing protection
3. It operates as full power on/off if QTC pill is removed. QTC pill can be accessed from battery inlet.
Important notes:
1. The dragon and 忍者 are not engraved by a machine. It's handmade. with deep etching, the results will have slight variations; depths, lines not straight or clear defined, small excess or not enough etching here and there. They somehow give individuality of appearance to each light. If you are looking for perfectly machined outer appearance, this is not the light for you.
2. We reserve the rights to refuse the sale.
Price: $65
Basic package:
1 x brass Ninja mini light
2 x Li-ion rechargeable battery
1 x brass USB battery charger
1 x extra body o-ring
1 x petina brass triangle key ring
Extra charges:
- $15 for a tritium vial installed with choice of colors. Please refer to www.mixglo.com for color selections and brightness.
- $5 shipping via International Registered Mail from Taiwan
- $25 Express Mail Service (EMS) shipping
Free of charge: petina
1. Petina in indented areas, w/ green or w/o green rust
2. Petina for all, green or w/o green rust
Payment: Only Paypal is accepted
How to order: Please send payment directly to [email protected]
You can also order them directly from my website, linked in my signature. For orders with tritium locator, please state the color along with your Paypal payment,
For those who want patina finish, please specify the type of petina along with your payment.
All orders will be processed by payment received.
First shipment will go out on or before Jan 13. After that, please allow us 3 working days for shipping.
Send me a PM if you have questions or special requests.
.
Ninja Specs:
Brass hosts with deep etching of a dragon and 忍者 (Ninja in Japanese)
Newest and the brightest XP-G2 emitter; S4, 2C (cool white, 5700K, slightly yellow in tint)
Scratch resistant sapphire glass
SMO aluminum reflector w/ 16 degree beam angle
Operating on a single Li-ion 10220 rechargeable battery
Dimensions: 16 x 50 mm or 0.64 x 2"
Weight: 48 grams or 1.7 oz. w/o battery
One slot for tritium locator of 3 x 16 mm, viewable from five sides.
5mm hole for Paracord/triangle ring
UI:
Two-stage control:
- Turn to control on/off
- 0 to around 60% of power, variable brightness via QTC control
- Around 60% of power, system ramps up to max output.
QTC pill double-protection:
1. No direct contact between battery and QTC pill.
2. Anti-squashing protection
3. It operates as full power on/off if QTC pill is removed. QTC pill can be accessed from battery inlet.
Important notes:
1. The dragon and 忍者 are not engraved by a machine. It's handmade. with deep etching, the results will have slight variations; depths, lines not straight or clear defined, small excess or not enough etching here and there. They somehow give individuality of appearance to each light. If you are looking for perfectly machined outer appearance, this is not the light for you.
2. We reserve the rights to refuse the sale.
Price: $65
Basic package:
1 x brass Ninja mini light
2 x Li-ion rechargeable battery
1 x brass USB battery charger
1 x extra body o-ring
1 x petina brass triangle key ring
Extra charges:
- $15 for a tritium vial installed with choice of colors. Please refer to www.mixglo.com for color selections and brightness.
- $5 shipping via International Registered Mail from Taiwan
- $25 Express Mail Service (EMS) shipping
Free of charge: petina
1. Petina in indented areas, w/ green or w/o green rust
2. Petina for all, green or w/o green rust
Payment: Only Paypal is accepted
How to order: Please send payment directly to [email protected]
You can also order them directly from my website, linked in my signature. For orders with tritium locator, please state the color along with your Paypal payment,
For those who want patina finish, please specify the type of petina along with your payment.
All orders will be processed by payment received.
First shipment will go out on or before Jan 13. After that, please allow us 3 working days for shipping.
Send me a PM if you have questions or special requests.
Last edited: