Pressure Switch Tailcap for G2 ??

[Normark]

Hey Guys...

Just wondering if there is a pressure switch tailcap for the G2 or 6P?

Thanks

Eric...

 

[dougmccoy]

Eric

I've seen a picture of a Kroll switch having been used on a G2 as a modification. Doesn't look asthetically pleasing!

Sorry but I don't know of any other types that fit the G2!

Kind regards

Doug McCoy

PS! did you get my previous emails?

 

[Roy]

Here is how I put a Kroll in my G2:

1 Remove the bezel and take the batteries out.

2 Remove the switch mech from the tail cap. Leave the rubber boot in place.

3 Remove the rubber boot from the Kroll.

4 Wrap enough alimumin(sp) foil around the threads on the Kroll so that the Kroll fits snugly into the battery tube.

5 Screw the end cap onto the battery tube.

6 Put the batteries back in and screw the bezel back on.

7. The Kroll shoul now work normally.

8. REMEMBER...Batteries should go in via the bezel! I f you use the switch end to replace the batteries, you could loose the switch!

 

[Size15's]

I think Eric is after a tape pressure switch right?

The Sxx switches should fit. Hold on a moment, I'll check...

Al

 

[PieThatCorner]

[ QUOTE ]
Size15s said:
I think Eric is after a tape pressure switch right?

The Sxx switches should fit. Hold on a moment, I'll check...

Al

[/ QUOTE ]

That's what I thought... you can find one at www.lightfighter.com or at www.impactguns.com

-Jim

 

[Size15's]

Oh Poo!

The G2's TailCap button is smaller than a Aluminium TailCap's. Therefore the Sxx won't fit in it.

Al