• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired sale over

Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

pm sent! :grin2:
 
Last edited:
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

#1 and #3 sold to TwoWheelNomad
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

:paypal:

ID #6GL54118JR1472110

:thanks:
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

2 & 4 still available.
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

I think you have a misprint in #4: If i recall RCR won't fit, only primary.
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

I think you have a misprint in #4: If i recall RCR won't fit, only primary.

I was iffy myself when I got them, thinking they were all CR123A bodies. But two of them really are RCR123A bodies. They are slightly thinner than the CR123A body. And protected AW RCR123A's do fit in these two, I verified this.

Apparently Nekomane did a special run of these.

The CR123A is best if you carry with a primary, because the body is stronger and there is no rattle. It's good to have both to switch back and forth depending on the situation.
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

Free bump!

The Nekomane bodies with unanodized threads on one side will also fit the original versions of the 2 level L2T and L2S. I wish I could get the pill out of mine to mod it with a P4.

None of the Fenix's were designed for 3.7v (4.2v max) LiIon so use at your own risk.
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

Free bump!

The Nekomane bodies with unanodized threads on one side will also fit the original versions of the 2 level L2T and L2S. I wish I could get the pill out of mine to mod it with a P4.

None of the Fenix's were designed for 3.7v (4.2v max) LiIon so use at your own risk.


Which do you have? The Millermods version are not loctited, so the pill unscrews right out without any effort. I did unscrew one from and L2T once. It was not as hard as I thought it would be.
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

I couldn't find anything in the millermods section on the Fenixes, nor have I been around long enough to know, so I'll try here. What was done to mod these lights?
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

I couldn't find anything in the millermods section on the Fenixes, nor have I been around long enough to know, so I'll try here. What was done to mod these lights?


Millermods modded them with his high current driver. Fenix-store sold these originally.
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

Nekomane CR123A body is sold.
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

#2, 4a., 4b., & 4d. still available.
 
Re: WTS: MillerMods Fenix L2P's, Nekomane RCR123A/CR123A bodies & accessories

I'll take #2, PM Sent.
 
Top