Sold/Expired SST-50 & SST-90 Mag-Lite Kit

[Der Wichtel]

​

The kit includes the following parts:

- 1x anodized socket ( please specify which one you like)
- 1x Heatsink for D Mag-Lites
- 2x M2 screws
- 1x SST-50 or SST-90 driver

for a total price of 50€ or 56€ with the adjustable driver

Of course all the parts can be bought seperately:

for standard D size Mag-Lite:
- High SST-50 socket & heatsink 17€
- High SST-90 socket & heatsink 17€

for Luxeon Rebel based D size Mag-Lite:
- Low SST-50 socket & heatsink 17€
- Low SST-90 socket & heatsink 17€

- SST-50 or SST-90 driver 35€/41€


Shipping:

Germany: 2.20€
International: 3.45€
- optional registered mail: +2.15€
If you are interested please contact me via email:

or PM

 

[badtziscool]

What's the difference between the two sockets? It looks like one is thicker than the other. Is there a reason for the option between the two?

Edit: Oh. I think I know now. One is for the regular incand Mag D and the other is for the LED Mag D.

 

[Mettee]

boo ya! sweet, that was fast.

 

[Nuclear Cowboy]

for sockect and heatsink.

Thanks,
NC

 

[clark.mac]

Could someone recommend an ideal battery combination with this setup to drive the sst 90 at 9 amps.
Hopefully for at least 60min runtime. Is this possible with readily available NiMH's?

Thanks a lot

 

[F_P_R]

Hi,
what Switch do you use for the 5A/9A Driver in a Mag???

Greetings

 

[Der Wichtel]

I'm using the original Mag switch. With the driver the input current is lower thatn the output current so that there shouldn't be any problems.

 

[FroggyTaco]

Could someone recommend an ideal battery combination with this setup to drive the sst 90 at 9 amps.
Hopefully for at least 60min runtime. Is this possible with readily available NiMH's?

Thanks a lot

4 Nimh C cells in a 3D mag with a smaller tail cap spring and a resistance mod done to the tail cap.

 

[357mag1]

4 Nimh C cells in a 3D mag with a smaller tail cap spring and a resistance mod done to the tail cap.

If you want 60 minutes of runtime you will need to go to 4D cells.

 

[clark.mac]

I really appreciate the suggestions. About how long would the runtime with 4 C's be?

Thanks

 

[Der Wichtel]

You can also use 3x 26650 from batteryspace in a 3D for an hour of runtime. But keep in mind that 9A can not be used without pauses

 

[stinky]

Would the drivers work with 6v magcharger NIMH packs? They are the same size as 3D.

Thanks!

 

[Der Wichtel]

I don't think it will work. The voltage will drop immediately below 6V under load.

 

[tino79]

Has anyone an introduction how to put all in an 4D Mag and which components I need besides the ones which wichtel sells? I wanna put a SST-90 LED in my 4D Mag and use it with the full 9A.

 

[FroggyTaco]

I really appreciate the suggestions. About how long would the runtime with 4 C's be?

Thanks

23 minutes at max power

 

[rayman]

Nice heatsink. I might have to buy one or two .

rayman

 

[holdthat1]

Dw

what's the thickest guage of wire that can be used with the heatsink?


Richard

 

[Der Wichtel]

for SST-50 up to 1.75mm and SST-90 up to 2.6mm diameter but that's absolute maximum

 

[FBsLights]

How much room between bottom of heatsink and top of mag switch?

Is the bottom of heatsink hallow to allow more room for driver boards?

Thanks,
FB

 

[Der Wichtel]

Yes, as can be seen here ( 7th picture):
http://www.candlepowerforums.com/vb/showthread.php?t=283352