SST-90 heatsink

[Caronte]

Hello everyone!
This is not my first post, but the previous account (with the same username) is been deleted.
So, I'm searching for some heatsinks for SST-90 leds and I've seen something like this:

Not these, but very similar.
This type of heatsinks are enough for an SST-90?
I don't want to exceed 50°C of increase from ambient temperature when the light is on.
This is used to adapting leds in incandescent flashlight, so the flashlight body too is used as an heatsink?

Best regards from Pisa.

 

[Codiak]

http://www.britelumens.com/

Yes the mag head and body would be part of the sink.
As to temp I suggest you use a driver that will step down current when a set threshold is exceeded.... look at Taskled.com

 

[Caronte]

http://www.britelumens.com/

Yes the mag head and body would be part of the sink.
As to temp I suggest you use a driver that will step down current when a set threshold is exceeded.... look at Taskled.com

Thank you!
In Britelumens' site there are the heatsink that i've seen. :D

For taskled.com, they no longer ship to Italy. :shakehead

So, for heatsink I must find out something more dissipative.

 

[Codiak]

For taskled.com, they no longer ship to Italy. :shakehead

tive.

So order indirectly through www.cutter.com.au. Just search cutter site for task led products ;)