Surefire Millennium Universal Weaponlight LED conversion?

[Schützen]

It's an older Millennium WML with an ARMS mount and non-IR/incandescent head. What options exist to convert it to LED, aside from KM3 and KM4 heads? I don't care if it's a drop-in or complete head. TIA!

 

[m4a1usr]

If your WML has the M2 head (M951/952) you can install any of the P60/D26 modules as they fit. Not perfectly unless you get a Malkoff or EDC+ drop in. If you get a cheapie P60 led all you need to do is taper the lower section where the pill threads into the reflector. I use a Jewelers lathe to cut mine (I sell them on Ebay) but you could do it with a file if you take your time and cut it carefully.

If your WML has a M3 head (M961/M962) than you can get one of nailbenders D36 modules and install it. That however requires you to send it to Dave or buy an M3 bezel removal tool. I have been building my own versions using a 37mm reflector from DealeXtreme. A XML T6 or U2 really kick booty in that relector!

 

[Closet_Flashaholic]

Just tonight I received and upgraded my M500 (M3 head) with a Malkov MD10 dropin. What an awesome option!. For some reason that particular combo just screams with the upgraded lumens and runtime. I can't believe that I didn't do this years ago. It's almost the ideal hotspot and spill and good out past 100 yards now with a really nice tint. I think the incandescents are almost a little too warm.

I am really excited about doing my M3 light tomorrow night with the second MD10. I may even start EDCing it again.

It's like they're brand new Surefire lights!

I sure hope this doesn't become addictive, I can now see why there are so many people into the whole P60 dropin thing...MUST RESIST... must resist.... .... click.