Want smaller,warm tint LED light. Need Help.

[Tec40]

I have an INOVA T1-MP,the 2008 model. I LOVE the warm tint of the K2. I was wondering,are there any lights out there that are as small as the Fenix P2D,that have a warm,bright tint? Would prefer a light that uses CR123's.

 

[Oddjob]

My Liteflux LF3XT has a warm tint. I specifically asked Khoo to pick a warm tinit for me. It's a great light. Definitely worth doing a seach and doing some reading on.

 

[Gunner12]

The Dereelight C2H is available with a neutral white LED. Would you like warm tinted cool white LED or more incan like warm of the neutral white LED?

 

[kraz]

My Liteflux LF3XT has a warm tint. I specifically asked Khoo to pick a warm tinit for me. It's a great light. Definitely worth doing a seach and doing some reading on.

+1. My LF3XT has a nice warm tint as well. Not quite as warm as my old P3D Rebel 100 but quite pleasing nevertheless.

Another consideration is the fact that the LF3XT runs on regular CR123s, Li-Ion RCR123s AND LiFePO4 RCR123s.

 

[carbine15]

I warm tinted my QIII, put glass in it and put a high low switch in it with a GITD tailcap. Very nice EDC light. Very warm tint that is warmer than any incandescent that I have.

 

[ZMZ67]

I think the Jetbeam element is also available with a warm emitter at BOG.The Element(1 AA) is a little larger than some of the others.I use the NC EX10 GD or a Fenix P2D(P4 CREE) as my EDC but neither are warm like my INOVA T1s.There doesn't seem to be much available in EDC size lights that have a warm tint.I keep hoping Fenix or Nitecore will introduce warm CREEs in their single cell lights.

 

[Flying Turtle]

+2 on the LF3XT. I've seen a recently purchased one that seemed warm compared to mine which I got in late November. It sounds like the newer ones are coming out in a warmer tint. Probably no guarantee, but it's a great light to consider.

Geoff

 

[Tec40]

I think I will check out the Dereelight CH2. I think that's as close as I can get. Thanks Gunner12. Where can I buy one?

 

[kurni]

This is Dereelight purchase page:

http://www.dereelight.com/c2h.htm

Let us know how you like it. I was really tempted but held back after considering the poor circuit efficiency, as reviewed here.

 

[rayman]

If you don't mind modding you could buy a Nitecore EX10 and mod it with a Cree Q3-A5. There is a groupbuy over at the MP. It's closed at the moment but I think one person jumped off and maybe you can get one.

rayman

 

[LEDninja]

*LIST* of LED flashlights WARM/NEUTRAL/~4000K
http://www.candlepowerforums.com/vb/showthread.php?t=212642

 

[Tec40]

Thanks guys for all the help. I've decided to just stick with my INOVA T1-MP. I'm not into modding(yet). I will just wait until the 5A-Q3 comes standard on a light that cost's around the 50 to 60 dollar range. Thanks again.

 

[Tec40]

Gunner12, What is the diffrence between the RU and the RD Q3 5A on the Dereelight C2H?

 

[Strauss]

Gunner12, What is the diffrence between the RU and the RD Q3 5A on the Dereelight C2H?

RU: Means ramp up, light first powers on low then you can "ramp-up" to high.

RD: Means ramp down, light powers on high then can "ramped-down" to a lower level.

 

[Tec40]

Thanks Strauss for your help on that one. I might get the Dereelight C2H,or the Jetbeam III-M with the warm tint. Just have'nt decided yet.

 

[Zeruel]

Think bigger! Get the small Raw NS/AL/Ti, max 200 lumens with warm Neutral White. :laughing: