• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired (CLOSED) 9AA to 3D and 6AA/6x14500 to 2D

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,532
Location
California
[size=+5]
CLOSED​
[/size]

9AAto3D010.jpg

9AAto3D012.jpg

6x14500.jpg

9AAto3D004.jpg

1650003.jpg


Hi folks,
These adapters are patent pending and ready to ship now.
6x14500 (protected) lithium ion to use in stock 2D for WA1111 or ROP HOLA operation. These adapters are connected in 2serial/3parallel (7.4 volt) and made by black plastic for easy to recognize.
All batteries in black adapters are installed in same direction. Positive to knurling nut, negative to charging jack side.
9AA to 3D NiMH white adapters to power up an WA1185, WA1331 or WA1166
6AA to 2D NiMH white adapters to power up an WA1111 or ROP
All batteries in white adapters are installed in different direction. Please follow Positive and Negative marks printed as P and N
All adapters come with female tail jack connector (installed) and I will include male jack too. [size=+1]Batteries NOT included[/size]
Remember, center pin of charging jack is POSITIVE
It is highly recommended to use this feature for recharging batteries by any smart battery pack charger like this for NiMH or this for lithium ion cells. However it is possible to remove batteries to recharge or replace.
Please do not use two of these adapters in same flashlight for higher voltage.
I also have some bi-pin WA1185 which can be overdriven by 9AAs in 3D M*g and Pelican 3854 in sealed pack (Hi & Low)
6x14500 to 2D $37 for first adapter. Each additional 6x14500 $35 (NOT AVAILABLE)
9AA to 3D $40 for first adapter. Each additional 9AA adapter $39 (NOT AVAILABLE)
6AA to 2D $39 for first adapter. Each additional 6AA adapter $38 (NOT AVAILABLE)
Dual function aluminum reflector $25 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
SS high temp G4 bi-pin socket $19 each (AVAILABLE)
Brass high temp G4 bi-pin socket $16 each (AVAILABLE)
Bi-pin WA1185 $6 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Bi-pin WA1111 $9 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Pelican 3854 $10 (each pack) (OUT OF STOCK)
Boro lens $5.5 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Dummy AA (high quality) $8 each
$6 shipping to States for up to 3 adapters of any kind, then add $0.50 for each additional one.
$7 shipping to international destination for up to 2 adapters of any kind, then add $1 for each additional one.. (No tracking available)
No additional shipping for bulbs and or reflectors if purchased with battery holders.
Paypal to: DO NOT PAY
[size=+2]More battery holders available here[/size]
Please PM me for other type of payment.
It is [size=+2]necessary[/size] to post your request here for ducumentation and same information including your CPF handle in paypal note.
It is [size=+2]necessary[/size] to post your request here for ducumentation and same information including your CPF handle in paypal note.
Example: :paypal: for 2 9x14500 to 3D and 1 6AA to 2D
Any question or comment welcome.
 
Last edited:

KeeperSD

Enlightened
Joined
Sep 3, 2006
Messages
581
Location
QLD, Australia
Re: 9AA to 3D and 6AA/6x14500 to 2D

Ahh yes finally, i will take

6AA - 2D - $39
Shipping - $7

Total $46

Paypal sent

Thought i would get in early since i have missed the others. :thumbsup:
 

gsegelk

Newly Enlightened
Joined
Apr 17, 2007
Messages
199
Location
Charleston, SC
Re: 9AA to 3D and 6AA/6x14500 to 2D

1. Boro lens = $5.50
2. 6AA to 2D converter = $39.00
3. Pelican 3854 = $10.00
4. Dual function MOP 8.38mm reflector = $30.00

Shipping = $6

Total: $90.50

...and...:paypal:

Thanks!!
 
Last edited:

Daekar

Enlightened
Joined
Mar 23, 2007
Messages
837
Location
Virginia, USA
Re: 9AA to 3D and 6AA/6x14500 to 2D

First 6AA-2D adapter: $39
Second 6AA-2D adapter: $38
[FONT=&quot]Shipping to CONUS: $6
Grand Total: $83.00
Finally getting my FM batteryholders: PRICELESS! :paypal:

EDIT: Adapters arrived today, 10/15/07, well packed and in good shape, as usual! Thanks FM!
[/FONT]
 
Last edited:

GRoLED

Newly Enlightened
Joined
Oct 12, 2006
Messages
135
Location
Perth, Australia
Re: 9AA to 3D and 6AA/6x14500 to 2D

1. 9AA to 3D = $40
2. 6AA to 2D = $39
3. Dual Function MOP 8.38mm Reflector = $30
4. Ceramic Socket = $28
5. 2 x Boro lens = $11
6. 2 x 1185 = $12
7. 2 x 1111 = $18
8. International Shipping = $7

TOTAL = $185

Edit: PM Sent...and....:paypal:
 
Last edited:

sb_pete

Newly Enlightened
Joined
Jun 16, 2007
Messages
195
Location
Santa Barbara, CA
Re: 9AA to 3D and 6AA/6x14500 to 2D

WooHoo! They're back!
:paypal: For:
1 x 9AA to 3D $40
1 x 6AA to 2D $39
1 x 8.38mm Dual function reflector (VLOP or LOP if you happen to have any sitting around, although MOP is fine if not) $25
1 x Gold plated ceramic socket $28
2 x Bi-pin WA1185 $6 each ($12 total)
1 x Pelican 3854 $10 (each pack)
$6 CONUS shipping

Total: $160

Thanks again Five.:thumbsup:
-Pete
 

Germanator

Newly Enlightened
Joined
Sep 16, 2007
Messages
13
Re: 9AA to 3D and 6AA/6x14500 to 2D

1 x 9AA to 3D $40
1 x 6AA to 2D $39
2 x 8.38mm Dual function reflector (VLOP if possible)($50)
2 x Gold plated ceramic socket ($56)
2 x Bi-pin WA1185 $6 each ($12 total)
1 x Pelican 3854 $10 (each pack)
2 x Boro lens ($11)
$6 CONUS shipping

Total: $224

Germanator:paypal:
 

gswitter

Flashlight Enthusiast
Joined
Apr 26, 2006
Messages
2,586
Location
California
Re: 9AA to 3D and 6AA/6x14500 to 2D

PayPal sent for:
- 6AA to 2D adapter ($39)
- Dual-function aluminum reflector -10.5 ($25)
- Dual-function aluminum reflector -12.7 ($25)
- Shipping to States ($6)

Total: $95
 

ProofTech

Newly Enlightened
Joined
Aug 18, 2006
Messages
110
Location
Boise, ID, USA
Re: 9AA to 3D and 6AA/6x14500 to 2D

:paypal: for:

1 x 6AA to 2D adapter $39
1 x 8.38mm dual function MOP reflector $25
2 x Bi-pin WA1111 bulbs $18
1 x Boro lens $5.50
Shipping $6
TOTAL $93.50

It's just my luck that the Gold Plated Ceramic Sockets would sell out just as the 6AA adapters become available again. :sigh: Hopefully it doesn't take too long for them to return.

ProofTech
 

Burman

Newly Enlightened
Joined
Apr 24, 2007
Messages
172
Location
Sweden
Re: 9AA to 3D and 6AA/6x14500 to 2D

:paypal: for:

9AA to 3D $40
Dual function aluminum reflector $25
Bi-pin WA1185 $6
international shipping $7

Total: $78

Thank you!
 

Scattergun

Enlightened
Joined
May 9, 2006
Messages
485
Re: 9AA to 3D and 6AA/6x14500 to 2D

As soon as my wallet recovers I´ll buy one 6AA-2D!!!
 

999snafu

Newly Enlightened
Joined
Mar 16, 2006
Messages
82
Location
North East UK
Re: 9AA to 3D and 6AA/6x14500 to 2D

:paypal: for:

1 x 6AA to 2D adapter $39
1 x 8.38mm dual function MOP reflector $25
plus int'l shipping $7.

Total- $71.
 

Visible EM Wave

Enlightened
Joined
Jun 16, 2006
Messages
251
Location
Toronto, Canada
Re: 9AA to 3D and 6AA/6x14500 to 2D

Thanks very much for making these adapters available again!

:paypal: for the following:

One 6x14500 to 2D adapter - $37
Two 6AA to 2D adapter - $39+$38 = $77
International shipping of 3 adapters - $8
Total of $122 USD.

Thanks a lot!
 

jyri

Newly Enlightened
Joined
Dec 19, 2006
Messages
43
Location
Finland
Re: 9AA to 3D and 6AA/6x14500 to 2D

:paypal: for

9AA to 3D ($40)
Dual Function MOP 8.38mm Reflector ($25)
2 x 1185 ($12)
International Shipping ($7)

Total: $84

jyri
 

tino_ale

Flashlight Enthusiast
Joined
Nov 20, 2005
Messages
1,646
Location
Paris, France
Re: 9AA to 3D and 6AA/6x14500 to 2D

Hi Fivemega

I noticed my 6AA>2D holder is longer than regular size. The mag spring already applies some pressure before thread engages, it makes it a bit awkward to close the tailcap.

Would you advise to cut the sprind a little to help with this?
 

Haraguchi

Newly Enlightened
Joined
Oct 12, 2007
Messages
1
Re: 9AA to 3D and 6AA/6x14500 to 2D

Hi Fivemega,
:paypal: for,
-6AA to 2D Adaptor: $39
-Dual Function MOP 8.38mm refrector: $25

International shipping: $7

Total: $71.00

Thanks!
 
Top