thom
Enlightened
Up for grabs at only $257.11 I have a Milkyspit modded HDS EDC Basic 42 XR #2702 with optional 17650 tube!!
This Milkyspit HDS SEOULmation mod is a tuneup of the entire light. He installed a Seoul emitter, of course... one that he hand-tested for both brightness and voltage requirement using some of his custom test equipment... this allows him to choose the best emitter of 100s on hand. Beyond that, he cleaned and polished the reflector as needed, cleaned and replaced the lens as needed, replaced o-rings if necessary, applied upgraded thermal compound to improve the thermal path from slug to the skin of the light, applied a nanoparticle lubricant to the battery tube threads, and tested the light's functionality in general. He has done quite a bit of R&D on ways of mounting the emitter (there are in fact multiple ways to do it) to come up with what seems the yield the best performance. Overall, it's the attention to detail that results in his charging a higher price than some other modders... though I believe still a very fair price, considering the level of quality and reputation that Milky is known for.
Not only does this light have a wonderful and classic HDS beam this light is supper bright!! It's brighter than the Novatac 120P I owned. Also, unlike the Novatac this light will run on 2 CR123 cells in addition to the 17650. Light comes with the original clip which has never been installed, all the original instructions, and bags. I would rate the overall condition of the light and battery tube at a 97% plus. There are no ugly dents, dings, or gouges. You have to look hard to notice anything imperfect. There is however, some very very minor thin spots in the HA surface.
I can include a Surefire E-series F-06 Blue filter for $3.28 more.
I can include a Bushwacker Flip up Red filter for $8.78 more.
I can also ship the lite with 2 new AW RCR123 cells for $12.43 more.
I have CPF mcmc making me a spring that will allow the use of 18650's with this tube. I will pass this on once I get it for only $28.33 with the purchase of the 17650 tube at $37.88.
I can include the Ti bezel ring show in some of the pics for $26.22 more. I bought it here: http://theledguy.chainreactionweb.com/product_info.php?products_id=739
Here are the pics:
$AVE more than $50.00 Over my already discounted prices GET IT ALL FOR Until 3-26 @ 11:22 am CST FOR: $324.02
THANKS for look'n
thom
Disclaimer:
First to state their unconditional I`ll take it, or smilely takeit, in this thread is given first chance to buy the item(s). PM's, E-mails, or other correspondence will not secure your position to buy. Do not assume anything, if something is not clearly stated, please protect both of us and have the issue cleared up before moving forward. I reserve the right (due to my busy schedule) not to reply to this thread, your E-mail, or your PM's for up to 48 hours. However, if I don't hear from you within 12 hours of stating in some form "I`ll take it" I may at my discretion chose to sell the item to someone else. I will ship (domestic lower 48) USPS Priority Mail with delivery confirmation unless otherwise stated, all other shipping options will be extra. Unless you are prepared to accept my shipping terms blindly I suggest you get a shipping quote for special shipping prior to posting "I'll take it." I am not responsible for ANY postal service negligence. However, if you chose to insure your item, and something goes wrong, I will go to every reasonable length to assist with the the insurance claim. Currently I accept ONLY PayPal for everyones protection. I may be contacted via the E-mail link inside my profile.
This Milkyspit HDS SEOULmation mod is a tuneup of the entire light. He installed a Seoul emitter, of course... one that he hand-tested for both brightness and voltage requirement using some of his custom test equipment... this allows him to choose the best emitter of 100s on hand. Beyond that, he cleaned and polished the reflector as needed, cleaned and replaced the lens as needed, replaced o-rings if necessary, applied upgraded thermal compound to improve the thermal path from slug to the skin of the light, applied a nanoparticle lubricant to the battery tube threads, and tested the light's functionality in general. He has done quite a bit of R&D on ways of mounting the emitter (there are in fact multiple ways to do it) to come up with what seems the yield the best performance. Overall, it's the attention to detail that results in his charging a higher price than some other modders... though I believe still a very fair price, considering the level of quality and reputation that Milky is known for.
Not only does this light have a wonderful and classic HDS beam this light is supper bright!! It's brighter than the Novatac 120P I owned. Also, unlike the Novatac this light will run on 2 CR123 cells in addition to the 17650. Light comes with the original clip which has never been installed, all the original instructions, and bags. I would rate the overall condition of the light and battery tube at a 97% plus. There are no ugly dents, dings, or gouges. You have to look hard to notice anything imperfect. There is however, some very very minor thin spots in the HA surface.
I can include a Surefire E-series F-06 Blue filter for $3.28 more.
I can include a Bushwacker Flip up Red filter for $8.78 more.
I can also ship the lite with 2 new AW RCR123 cells for $12.43 more.
I have CPF mcmc making me a spring that will allow the use of 18650's with this tube. I will pass this on once I get it for only $28.33 with the purchase of the 17650 tube at $37.88.
I can include the Ti bezel ring show in some of the pics for $26.22 more. I bought it here: http://theledguy.chainreactionweb.com/product_info.php?products_id=739
Here are the pics:
$AVE more than $50.00 Over my already discounted prices GET IT ALL FOR Until 3-26 @ 11:22 am CST FOR: $324.02
THANKS for look'n
thom
Disclaimer:
First to state their unconditional I`ll take it, or smilely takeit, in this thread is given first chance to buy the item(s). PM's, E-mails, or other correspondence will not secure your position to buy. Do not assume anything, if something is not clearly stated, please protect both of us and have the issue cleared up before moving forward. I reserve the right (due to my busy schedule) not to reply to this thread, your E-mail, or your PM's for up to 48 hours. However, if I don't hear from you within 12 hours of stating in some form "I`ll take it" I may at my discretion chose to sell the item to someone else. I will ship (domestic lower 48) USPS Priority Mail with delivery confirmation unless otherwise stated, all other shipping options will be extra. Unless you are prepared to accept my shipping terms blindly I suggest you get a shipping quote for special shipping prior to posting "I'll take it." I am not responsible for ANY postal service negligence. However, if you chose to insure your item, and something goes wrong, I will go to every reasonable length to assist with the the insurance claim. Currently I accept ONLY PayPal for everyones protection. I may be contacted via the E-mail link inside my profile.
Last edited:
