Rayovac 1AAA Penlight

bl4kkat · May 14, 2008

hey guys i just got the 1aaa penlight the other day for less than $3 bucks and was wondering if anyone had any instructions on taking it apart?

i only found one thread dated a while back but they didnt say how they were able to take the plastic cover off... i used a pair of pliers but i kindda smashed the plastic threads on the light but still goes in fine...

dont want to break my new light i just bought :tinfoil:

thanks

defloyd77 · May 14, 2008

Just unscrew it.

discoverEDC · May 14, 2008

Once you have unscrewed the module out of the pen pop the black cap off of the end and the driver/led combo will pull out of the white plastic case. I used one to drive a lux3 for a bedside low low type light. I put the lux3/driver combo into a generic aluminum aaa incan body with no reflector or optic for a flood type beam.

bl4kkat · May 15, 2008

thanks for the info

i guess im going to have to desolder the black wire thats connected to the copper flap that touches the metal tube of the light

:grin2:

discoverEDC · May 15, 2008

You don't have to desolder it, the driver just pulls out. The wire will want to break at its connection on the board, just be careful.

Rayovac 1AAA Penlight

bl4kkat

Newly Enlightened

defloyd77

Flashlight Enthusiast

discoverEDC

Enlightened

bl4kkat

Newly Enlightened

discoverEDC

Enlightened

Similar threads

Latest posts