Hello all. My T5 is acting up. When I unscrew the bezel or the switch the light sometimes turns on, sometimes on high and sometimes on low. It will not turn off until one end of the body or the other is disconnected completely. The switch does nothing at all. I tried a different switch from another T5 and it does the same thing. Sometimes tapping the side does the same thing. Only unscrewing the body will turn it off. Once it is off it will sometimes return to normal operation but not 100%. The light doesn't overheat or anything dramatic like that, it's like it has a mind of it's own sometimes. It'll work okay for awhile and then it goes haywire. Suggestions? Thanks in advance. :thinking:
Amilite T5 acting strange, suggestions?
- Thread starter MarNav1
- Start date
Help Support Candle Power Flashlight Forum
glockboy
Flashlight Enthusiast
Try a different battery.
aussiebob
Enlightened
Simplest solutions are usually the best
nanotech17
Flashlight Enthusiast
I think this is the best solution unless you want to swap the driver on your own the GD500 or GD750 is the best because you can use both either cr & rcr123.
I contacted Neokevinn@amilite, will update when he answers.
Similar threads
