Upgrade to LED

gofaster_s13 · Sep 25, 2008

Does anyone know if there is an LED upgrade for these bulbs ??
Thanks

http://cgi.ebay.com/Bosch-14-4V-GLI...hash=item180291546549&_trksid=p3286.m63.l1177

Marduke · Sep 25, 2008

I don't know of a PR base LED upgrade that can go that high in voltage. The highest I know of tops out at 9v. That leaves a custom build.

How are you with a dremel and soldering iron :naughty:

gofaster_s13 · Sep 25, 2008

Handy enough with both a Dremel and a soldering iron, any suggestions??

Lynx_Arc · Sep 26, 2008

probably talking about 3 high power LEDs in series with a driver circuit in it.. I think the first question is how bad do you want it and how much you have to spend on it. A single LED and a buck circuit would be the cheapest probably a SSC P4 LED positioned on a heat sink at the focus of the reflector would do it.

TigerhawkT3 · Sep 26, 2008

4x5mm and a 20-30-ohm resistor should work.

Gunner12 · Sep 26, 2008

I think a single higher voltage buck driver with 1-3 LEDs wired in series on a large enough heatsink would work.

Upgrade to LED

gofaster_s13

Newly Enlightened

Marduke

Flashaholic

gofaster_s13

Newly Enlightened

Lynx_Arc

Flashaholic

TigerhawkT3

Flashlight Enthusiast

Gunner12

Flashaholic

Similar threads

Latest posts