The LED assembly was wobbly on my CMax last night and I wiggled it slightly to have it pop off in my hand. It seems like a straightforward reassembly but apparently I am missing something.
The head assembly has the LED housing and a twisty collar to change the color LEDS from wht to red to blue but I never bother. That came off as one peice. The top of the tube housing the batts I can see the spring where the LED assembly rests and gets it's energy. The bottom of the housing with the LED had a 'probe' coming down with a threaded end but the threads have flat surfaces machined to make the thing go in either one way or complete 180 the other. But above the threads inside the tube there are a set of metal flanges on each side. I can drop the head down in and just about get it to hit the threads to tighten but it won't quite make it and yes, I know this all sounds like idiot speak but I am hoping someone understands what I am seeing and what I am missing to get the thing back together.
The head assembly has the LED housing and a twisty collar to change the color LEDS from wht to red to blue but I never bother. That came off as one peice. The top of the tube housing the batts I can see the spring where the LED assembly rests and gets it's energy. The bottom of the housing with the LED had a 'probe' coming down with a threaded end but the threads have flat surfaces machined to make the thing go in either one way or complete 180 the other. But above the threads inside the tube there are a set of metal flanges on each side. I can drop the head down in and just about get it to hit the threads to tighten but it won't quite make it and yes, I know this all sounds like idiot speak but I am hoping someone understands what I am seeing and what I am missing to get the thing back together.