I recently began making a cabinet into a grow station. It's almost finished, but
im having trouble with the lighting system. In the beginning the idea was to
make a full-spectrum LED light array of no particular voltage. I wanted to mimic this array I saw on LED Lights and Light Fixtures
[/URL][/IMG]
[/URL][/IMG]
Then after I looked into it more I decided to use different types, and colors of
LED That would produce the same full-spectrum light pattern. I chose a Warm White, Super Blue, Super Red, ,and Super-UV I put links to the specifications of each LED.
I purchased 3 pieces of aluminum sheeting from Ace hardware and made 3
panels to mount the LED in.
hardware.
[/URL][/IMG]
These two are {18x9} in and have 99 holes {(11x9)} {Length x Width}
they will hopefully end up looking like this
[/URL][/IMG]
The other panel is { x } with 84 holes {(7x12)}
[/IMG]
This is What im planning
[/IMG]
im really having trouble please lend a hand.
P.S. Here a link to an LED series or parallel array wizard
im having trouble with the lighting system. In the beginning the idea was to
make a full-spectrum LED light array of no particular voltage. I wanted to mimic this array I saw on LED Lights and Light Fixtures
Then after I looked into it more I decided to use different types, and colors of
LED That would produce the same full-spectrum light pattern. I chose a Warm White, Super Blue, Super Red, ,and Super-UV I put links to the specifications of each LED.
I purchased 3 pieces of aluminum sheeting from Ace hardware and made 3
panels to mount the LED in.
hardware.
These two are {18x9} in and have 99 holes {(11x9)} {Length x Width}
they will hopefully end up looking like this
The other panel is { x } with 84 holes {(7x12)}
This is What im planning
im really having trouble please lend a hand.
P.S. Here a link to an LED series or parallel array wizard