Hi,
i wan to sale on of my minithrower. It is a Deft clone with a selected XM-L U3 (out of 20 emitters) driven at 5 amps! The Emitter is direct soldered to a copper star/copper heatsink! The thermal path is nearly perfect. No isolating barrier between the emitter and the heatsink, only copper.
- Only 1 Mode > regulated high at 4.9 Ampere. i can add some modes, but this will be some $$ extra.
- The Tailcap is bored out with a lathe so you can use a 32650. With a fresh charged cell i get over 4.5amps.you can also use 4xAA batterys, but you need a slim battery holder.
- i added some glow powder on the outer side of the emitter.
- 347.000lux messured @ 2 meters and converted to 1 meter. that are 347.000cd !
- i grinded the lens 3 years ago, so it is not perfectly (see the last picture), but if you look into the front it look PERFECT!
Beamshots will follow!
Price 249$ inlcude paypal fees, but no shipping.
Thanks for looking, Markus
i wan to sale on of my minithrower. It is a Deft clone with a selected XM-L U3 (out of 20 emitters) driven at 5 amps! The Emitter is direct soldered to a copper star/copper heatsink! The thermal path is nearly perfect. No isolating barrier between the emitter and the heatsink, only copper.
- Only 1 Mode > regulated high at 4.9 Ampere. i can add some modes, but this will be some $$ extra.
- The Tailcap is bored out with a lathe so you can use a 32650. With a fresh charged cell i get over 4.5amps.you can also use 4xAA batterys, but you need a slim battery holder.
- i added some glow powder on the outer side of the emitter.
- 347.000lux messured @ 2 meters and converted to 1 meter. that are 347.000cd !
- i grinded the lens 3 years ago, so it is not perfectly (see the last picture), but if you look into the front it look PERFECT!
Beamshots will follow!
Price 249$ inlcude paypal fees, but no shipping.
Thanks for looking, Markus
Last edited: