FS: 4000+ Lumen Maglite with Cree XHP-70 LED!
The ASX70 utilizes the most cutting edge technology available in the world today. The Cree XHP-70 direct bonded to a copper mcpcb, coupled with the extreme drive current of a custom circuit board delivers OCEANS of light with the click of a swich.
In addition the multilevel brightness feature offers perfectly usable amounts of light for any occasion, and long extended run times.
The ASX70 is is both a powerful tool, and an exhilarating toy. Watch the look on your friends faces when they see and feel the shock wave of power barreling out of the end of this light!!
SPECS:
- 2 D cell Maglite host ( choice of color)
- Cree XHP-70 emitter
- Solid copper heat sink
- Custom body sleeve and recessed tail spring
- Powered by 2 x 26650s ( not included)
- Custom high output Driver, and user interface
- High temp glass lens 94% transparent
EMITTER OPTIONS:
N4 ( highest brightness bin)
-5700K
-5000K
N2
-6500k
M2
-4500k
-4000k
-3500k
-2700k
The rated output of 4000+ lumens is based on use of N4 bins, so actual output may be slightly below that when lower bins are used.
USER INTERFACE
1. My most popular UI the "Sport"
The UI consists of 4 groups.
1. Ramp mode low to high with memory.
2. Low 2%, Med 25%, High 100% with memory.
3. Low 2% Med 25%, High 100%, Srobe, SOS, Beacon, NO memory.
4. High 100%, Low 15%.
The light will come preset to your choice of group if needed.
Mode groups are switched by 8 fast clicks <.25 sec.
http://www.youtube.com/watch?v=NSSQxqZH290
OPTION 2
DrJones Universal guppy2drv
This firmware can be left with the programming mode "open" so all of the groups are available. Or you can choose ONE and it can be permanently locked in essentially giving you only the modes in the group number.
User Selectable Groups:
1% - 25% - 100% | Memory
1% - 25% - 100% | No Memory
100% - 25% - 1% | No Memory
1% - 25% - 100% - Strobe | No Memory
1% - 25% - 100% - Strobe | Memory
10% - 100% | Memory
10% - 100% | No Memory
100% - 10% | No Memory
100%
100% - Strobe | No Memory
Strobe - 100% | No Memory
ML - 2% - 25% - 100% | Memory
ML - 2% - 25% - 100% - Strobe - Beacon | No Memory
ML - 100% | No Memory
100% - ML | No Memory
ML - 100% | Memory
ML - 1% - 5% - 15% - 40% - 100% | Memory
ML - 1% - 5% - 15% - 40% - 100% | No Memory
100% - 40% - 15% - 5% - 1% - ML | No Memory
100% - 40% - 15% - 5% - 1% - ML | Memory
1% - 5% - 15% - 40% - 100% | Memory
1% - 5% - 15% - 40% - 100% | No Memory
100% - 40% - 15% - 5% - 1% | No Memory
100% - 40% - 15% - 5% - 1% | Memory
Guppydrv ?Instructions
To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized.
Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times. The light will blink to recognize the mode group change.
To lock the mode groups: Solder Star 2 to ground. This must be done before the driver is installed. If you want your group locked just make a note of it in paypal
PLEASE BE SURE TO:
1. Leave your CPF handle AND details of you order in PAYPAL NOTES. Including emitter color, host color and UI.
Also please leave these details in the thread.
Lead time for these will be around 3-5 weeks
Disclaimer:
ASflashligts not affiliated with Mag instrument inc. which owns the MAG family of trade marks including Mag-Lite and Mini-Maglite. My custom shorty flashlights are not made, endorsed, recommended, licensed or approved by Mag instruments inc.
List Date: 5/12/2015
For more info, click here to view the original listing: FS: 4000+ Lumen Maglite with Cree XHP-70 LED!
--------------------------------------
On Sale For: $265.00
--------------------------------------
The ASX70 utilizes the most cutting edge technology available in the world today. The Cree XHP-70 direct bonded to a copper mcpcb, coupled with the extreme drive current of a custom circuit board delivers OCEANS of light with the click of a swich.
In addition the multilevel brightness feature offers perfectly usable amounts of light for any occasion, and long extended run times.
The ASX70 is is both a powerful tool, and an exhilarating toy. Watch the look on your friends faces when they see and feel the shock wave of power barreling out of the end of this light!!
SPECS:
- 2 D cell Maglite host ( choice of color)
- Cree XHP-70 emitter
- Solid copper heat sink
- Custom body sleeve and recessed tail spring
- Powered by 2 x 26650s ( not included)
- Custom high output Driver, and user interface
- High temp glass lens 94% transparent
EMITTER OPTIONS:
N4 ( highest brightness bin)
-5700K
-5000K
N2
-6500k
M2
-4500k
-4000k
-3500k
-2700k
The rated output of 4000+ lumens is based on use of N4 bins, so actual output may be slightly below that when lower bins are used.
USER INTERFACE
1. My most popular UI the "Sport"
The UI consists of 4 groups.
1. Ramp mode low to high with memory.
2. Low 2%, Med 25%, High 100% with memory.
3. Low 2% Med 25%, High 100%, Srobe, SOS, Beacon, NO memory.
4. High 100%, Low 15%.
The light will come preset to your choice of group if needed.
Mode groups are switched by 8 fast clicks <.25 sec.
http://www.youtube.com/watch?v=NSSQxqZH290
OPTION 2
DrJones Universal guppy2drv
This firmware can be left with the programming mode "open" so all of the groups are available. Or you can choose ONE and it can be permanently locked in essentially giving you only the modes in the group number.
User Selectable Groups:
1% - 25% - 100% | Memory
1% - 25% - 100% | No Memory
100% - 25% - 1% | No Memory
1% - 25% - 100% - Strobe | No Memory
1% - 25% - 100% - Strobe | Memory
10% - 100% | Memory
10% - 100% | No Memory
100% - 10% | No Memory
100%
100% - Strobe | No Memory
Strobe - 100% | No Memory
ML - 2% - 25% - 100% | Memory
ML - 2% - 25% - 100% - Strobe - Beacon | No Memory
ML - 100% | No Memory
100% - ML | No Memory
ML - 100% | Memory
ML - 1% - 5% - 15% - 40% - 100% | Memory
ML - 1% - 5% - 15% - 40% - 100% | No Memory
100% - 40% - 15% - 5% - 1% - ML | No Memory
100% - 40% - 15% - 5% - 1% - ML | Memory
1% - 5% - 15% - 40% - 100% | Memory
1% - 5% - 15% - 40% - 100% | No Memory
100% - 40% - 15% - 5% - 1% | No Memory
100% - 40% - 15% - 5% - 1% | Memory
Guppydrv ?Instructions
To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized.
Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times. The light will blink to recognize the mode group change.
To lock the mode groups: Solder Star 2 to ground. This must be done before the driver is installed. If you want your group locked just make a note of it in paypal
PLEASE BE SURE TO:
1. Leave your CPF handle AND details of you order in PAYPAL NOTES. Including emitter color, host color and UI.
Also please leave these details in the thread.
Lead time for these will be around 3-5 weeks
Disclaimer:
ASflashligts not affiliated with Mag instrument inc. which owns the MAG family of trade marks including Mag-Lite and Mini-Maglite. My custom shorty flashlights are not made, endorsed, recommended, licensed or approved by Mag instruments inc.
List Date: 5/12/2015
For more info, click here to view the original listing: FS: 4000+ Lumen Maglite with Cree XHP-70 LED!
--------------------------------------
On Sale For: $265.00
--------------------------------------
Last edited: