2550 lumen, 1x 18650, 3 XML2 Power House!!

Hi all,



Link for purchase is here













- 3 Cree XML2 U2 1C on copper heat sink
- 4 mode driver Low 10 lumen, Medium 150 lumen, High 1250, Turbo 2550
- low voltage protection
- Removable pocket clip
- single 18650 powered ( battery not included)

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

That's quite beautiful!

Nice, bookmarked for when I am better off then today ☺
Beam shots by chance?

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

Great light! What is the amps on Turbo?

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

texas cop said:

Great light! What is the amps on Turbo?

Click to expand...

Good question. Also, lux and color temperature? Inquiring minds want to know.
Intriguing light!

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

Thanks guys.

I get around 8 amps at the tail with an IMR and about 6 with a regular. I don't have a lux reading at this time, but color temp is 6500k 1C.

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

Good looking light!! I would probably jump ALL OVER that if it had a 5000K-ish temp (3D, 3C)

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

Would buy if you are willing to make one with a nw led even slightly on the warmside. Maybe a xml T5. Not up to speed with all the new emitters and bins. If you could recommend a led with a higher leumns out put in the 4000 to 5000k range that would be suitable for this light.

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

mjgsxr said:

Would buy if you are willing to make one with a nw led even slightly on the warmside. Maybe a xml T5. Not up to speed with all the new emitters and bins. If you could recommend a led with a higher leumns out put in the 4000 to 5000k range that would be suitable for this light.

Click to expand...

I think an XM-L2 U3 3C (about 5000K) would be right on the mark! I like a slightly cooler-neutral.

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

Thinks for the info markr6. Have been looking on line since your reply. Think an xml2 u2 4c might be what I am after. Just a bit on the yellow side. Looks like you can get it in high cri as well.

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

mjgsxr said:

Thinks for the info markr6. Have been looking on line since your reply. Think an xml2 u2 4c might be what I am after. Just a bit on the yellow side. Looks like you can get it in high cri as well.

Click to expand...

That's nice too. It's a personal thing, but 3C, 3D, even a 2A since I'm starting to lean towards the cool side. 4C is just barely too warm for me, but I've seen comparisons with that and it's very nice.

I wonder what host this light uses. It looks familiar and I really like it. Reminds me of the FOURSEVENS Quark Turbo 123.

I'll wait to see if vestureofblood posts again. Maybe Ill send a PM soon to see if another LED is possible.

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

Think it is a unbranded eagle eye X6 flashlight. Gets good reviews from people modding this light.

Re: 2550 lumen, 1x 18650, 3 XML2 Powe House!!

mjgsxr said:

Think it is a unbranded eagle eye X6 flashlight. Gets good reviews from people modding this light.

Click to expand...

Yes, that looks like a good one...even the cheapo $20 stock version. Can't wait to hear back about the possibility of different emitters.

Neutral and im in

Good day gents.. I suppose a run of neutrals is in order then :welcome: .... I looked around a bit and found some options that are available for tint.

U2 3C
T6 4C
T5 5C1

These tints are fairly easy to come by so they will not effect price and should only add a few days to lead time. If you guys had another particular tint you want I can look around, but price/lead time may be effected

I will try to update the listing with some neutral options later today or tomorrow. If you dont want to wait you can order and just leave a note about tint.

Oh yeah!! 3C it is! I'll probably try to talk myself out of it for a couple days, then end up buying one. Standard "I don't need another flashlight" procedure

What light would have a similar beam?

I'm not really aware of any production lights that have a beam like this, so I dont know what to use as an example.

The beam is very wide but also deep. It does have a hot spot, but the spill is so bright in order to see it you have to point it down at the ground some.


In this shot I pointed it down some and the exposure time is dialed back a notch so you can kinda see the "shape" of the beam.

I added 4 new LED choices to the website now

Any news on the lux reading for this? Also interested if quad is available. Thanks.

Lux on these will be around 17-20,000 or so. I'm not aware of any quad mcpcbs/optics to fit this light right now.