lightnut57
Newly Enlightened
- Joined
- Sep 27, 2019
- Messages
- 4
Hi everyone,:wave:I have 6 solar lights that don't work anymore and wanting to rebuild them. My plains are to add leds to them and wire them all together with one DC power supply. I have no idea though on what is needed and what way to do it.:mecry:
Here are my questions of what I want to use.
1>>Do they need to be wired in Series or Parallel Circuits so they will all have the same brightness.
2>>Will I need to use resistors on each light and if so what size would I need.
3>>What size power supply would I need to run them all. I have 2 power supply's,a 12VDC 1000mA and 12VDC 25A. Also have more.
Thanks for the help!!
Here are my questions of what I want to use.
1>>Do they need to be wired in Series or Parallel Circuits so they will all have the same brightness.
2>>Will I need to use resistors on each light and if so what size would I need.
3>>What size power supply would I need to run them all. I have 2 power supply's,a 12VDC 1000mA and 12VDC 25A. Also have more.
Thanks for the help!!