Hogokansatsukan
Flashlight Enthusiast
READ THIS. ALL OF IT before you post. Make sure you understand it.
I am happy to look at your recommendations or wants when it comes to emitters to be put in an HDS and discussing them with Henry.
There are however some caveats.
1. You must post a link where that exact emitter can be purchased.
2. The emitter must have a footprint of 3.5mm X 3.5mm, commonly referred to as 3535 (we won't redesign the board to fit a small number of special emitters as that is time consuming and quite costly for a very small run i.e. under 1000 and we typically don't large runs of special emitters. I would much rather have a large variety than a large quantity.
3. The emitter must not be mounted i.e. not on a MCPCB or circuit board.
[h=1][/h]The valuation criteria for us includes efficiency, special characteristics such as color rendering, nm, how similar it is to one that was previously offered, etc.
Please do not recommend emitters that have already been used in HDS lights. If you want that, hit the used market.
Now, go back and read this again.
I am happy to look at your recommendations or wants when it comes to emitters to be put in an HDS and discussing them with Henry.
There are however some caveats.
1. You must post a link where that exact emitter can be purchased.
2. The emitter must have a footprint of 3.5mm X 3.5mm, commonly referred to as 3535 (we won't redesign the board to fit a small number of special emitters as that is time consuming and quite costly for a very small run i.e. under 1000 and we typically don't large runs of special emitters. I would much rather have a large variety than a large quantity.
3. The emitter must not be mounted i.e. not on a MCPCB or circuit board.
[h=1][/h]The valuation criteria for us includes efficiency, special characteristics such as color rendering, nm, how similar it is to one that was previously offered, etc.
Please do not recommend emitters that have already been used in HDS lights. If you want that, hit the used market.
Now, go back and read this again.