Sold/Expired The Second LionHeart 168A Body Interest Assessment

Due to popular demand, I'm considering a second run of LionHeart 168A bodies.

The LionHeart 168A body is used with a Pila 168A Li-ion battery instead of the stock 150A body. It provides a roughly 50% increase in runtime (based on the capacity of the 168A over the stock 150A battery). It also is more hand filling, giving your little finger something to hold on to.

The 168A body will be identical to the 150A body in all respects except length. All internal surfaces will be coated with Allodyne.

I am estimating that the price will be: $45 dollars for Natural anodized, $45 for Bare aluminum, and $50 for Black anodized. The actual price will be determined after interest is assessed. If demand is insufficient, color options may be dropped.

If you are interested, please reply with the color selection(s) from above plus the number of 168A bodies of each color that you would actually purchase.

Thank you.

1 Natural Anodized body.

(I already have atleast one body (bare aluminum?) on order)

Britt

Re: The Second LionHeart 168A Body Interest Assess

I'd like to try for $45 for the HA III NAT, though if it's not too expensive the HA III Black might be interesting as well.

I'd be in for 1x HA III NAT for sure.

Please put me down for the following:

1 Black HA,
1 Natural HA

/ubbthreads/images/graemlins/grin.gif

Thanks

Re: The Second LionHeart 168A Body Interest Assess

What would be the lengh of LH with 168A? Thanks.

Re: The Second LionHeart 168A Body Interest Assess

One natural anodized for me.

Thanks for the "second chance" Otok! /ubbthreads/images/graemlins/thumbsup.gif

Peter

Otokoyama,

Since you are at it, will you do a CR123 body for the LH?
That will be the ultimate LH body collection. I would love to see my LH in a tiny little 123 body for ultra portability. Please let us know if you will make a run for a tiny 123 body? Thanks again.

/ubbthreads/images/graemlins/grin.gif

Ray

EDITED 12/09/04:
I would definitely like one in bare aluminum!!!!!

I would be interested in 1 bare aluminum. I've been hoping that you would consider doing this.

TIA,

chasm22

Re: The Second LionHeart 168A Body Interest Assess

[ QUOTE ]
moraino said:What would be the length of LH with 168A? Thanks.

[/ QUOTE ]4.41"

Re: The Second LionHeart 168A Body Interest Assess

*raises hand* -ha3 natural.

would also be CHUFFED for a cr123 body.

Re: The Second LionHeart 168A Body Interest Assess

I will take 1 HA Natural 168A body.
The first time around I didn't have the money when the ordering was open, but I still want one badly.

Re: The Second LionHeart 168A Body Interest Assess

Paul,

I believe that I am already on your waiting list, but just to make sure, . . .

I am in for one, Black HAIII

I assume that the LionHeart is Black HA3. I prefer the same color.

Thanks
BuddTX
Bruce

Re: The Second LionHeart 168A Body Interest Assess

I'm in for one natural anodized.

Re: The Second LionHeart 168A Body Interest Assess

I'll look into the 123 body.

Re: The Second LionHeart 168A Body Interest Assess

That'd be pretty damned compact. Interesting idea... maybe you should attach a lanyard point or keychain point to it. /ubbthreads/images/graemlins/wink.gif

Re: The Second LionHeart 168A Body Interest Assess

I'm in for one of each.

1 bare
1 HA3
1 black

Not sure about the 123 body. It would depend on how much, and what kind of burn you get. If it won't run at full brightness, then I probably am not interested. It's small enough (IMHO) with the 150A body.

Larry

1 black please.

One black HA3 for me.

Curtis

Re: The Second LionHeart 168A Body Interest Assess

1 Black HA for me. Rick

Re: The Second LionHeart 168A Body Interest Assess

I am in for one to match my lionhart.
Yaesumofo