Source for a 18650 battery holder?

Candle Power Forums

Help Support Candle Power:

John N

Flashlight Enthusiast
Joined
Oct 12, 2001
Messages
2,273
City & State/Province
Seattle
I was wondering if anyone had a source for a battery holder for the 18650. By battery holder, I mean one of those dohickies that hold the battery and have terminals so you can solder it into an application.

Thanks,

-john
 
Dredging up an absolutely ancient thread here....

I don't know where to find one, but would be interested in one as well.
 
I built one for my mp3 player out of a plastic box (one of those with many small compartments for screws, electronic parts and the like). I dremeled one of the compartments off, glued the contacts of a C cell holder to the extremities, made a hinge out of zip tie tails and a very agricultural closing mechanism out of another zip tie and some plastic bag wire.

But all that is only useful if you don't value your time much... a proper holder would be a much better idea. Sadly, I don't think anyone is manufacturing them. I too searched all over the net for one, but found none...
 
Yes, to piggy back, I'd love to purchase holders for the 18650 for 2, 3 and 4 cell configurations.

Love to know if anyone knows a source.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Ahhh, glad to see I'm not the only person looking for these ! :candle:
I need such a holder to hook up my 18650 to a decent charger because I don't trust those cheap Li-Ion chargers a lot....
My idea is to get one of those cheap chargers, rip out all of the electronics and connect wires to the battery terminals.

Look for the 18650 x 1 charges on ebay, like the Ultrafire #WF137 or DSD Intelligent Charger for 16340/18650/17670 battery. Of course, they are much more expensive than battery holders should be, but still, I think it's worth it.
 
Poor man's holder using AA holders cut in half and "stretched". Been using it for about five years now. I have several poor man's adapters for shorter cells.
DSC_5616.jpg


This is powered by a poor man's charger using Linear LTC4054 driven by a 5V switcher. This has a charge termination indicator (red LED's)

LTC_CHARGER.jpg


As you can see, I'm very poor :D
 
CM said, "As you can see I am very poor".
_______________________________________________________________________________

and very rich in EE skills.

Bill
 
Hi CM,
Any man who makes a battery holder out of chip board can't be all bad:twothumbs:twothumbs. Makes me want to throw away my Pila.
 
I am amazed there is not a four or a three holder out there yet... and Im stoked to find fellow people trying to find these too! Plenty of 2s but none bigger!
 
Looking for a 3P/2S radial holder for a 2-D maglight. Anyone know if it exists?
 
Back
Top