re the LMH modes:
Not according to the Site's Specifications details....."
Now with 3 levels of brightness ( Medium / Low / High )."
read the whole page and you will see they contradict themselves, so, who are you going to believe? Im waiting for someone to receive their light and report which is right. Countycomm is not known for the accuracy of they cut and paste updates
Copper is too heavy and Ti doesn't dissipate heat well enough.
then you are in the wrong thread Its about a Copper twisty
there IS an Aluminum tool w Nichia on Amazon, but not LMH, and no sideways head
what you want, and what you can afford are clearly mutually exclusive
Although the Lumins aren't as high as the Maratac (if the figures are correct)
I doubt the Maratac figures are even remotely correct to begin with, much less with a Nichia
I did buy a copper Tool w Nichia from Gearbest recently, (it took 21 days to reach California) it has the unregulated, inefficient driver, like my Maratac. I really like the Nichia in my CuTool, and Im betting the exact same knurling and LED will be in the Maratac rev4
but, Im waiting for someone to buy me one so I can confirm the mode lumens, regulation, and lack of PWM
,
the Rev4 AA has "
nasty PWM" according to gunga, who tolerates fast PWM, so if he says nasty, it means .. I will pass. That was the first reason I did not buy the AA Copper Maratac when it was available recently.. And while Im telling it like it is, I wont buy a Ti Twisty, the threads are gritty. Ti is best suited to clickies imo