Eagtac SX25L3 (3x18650, 2750lm)

[vaughnsphotoart]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

I've had really great luck with all my Eagletacs. Im definitely interested in the MT-G version, it would make a perfect companion for my Thunite TN-31. I'm quite fond of the 3x 18650 side-by-side format.

 

[Glenn7]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

No the TX25C2 is not perfect (I don't think I've ever had a perfectly configured light even with any customs) the output and operation of it has impressed me enough to make want me to get the SX25L3 it just seems to tick so many boxes for me, so I've put my order in for the one with the kit - I like that with the kit (SS bezel/pouch/filters/tail switch) you get a spare battery tube with rear tail button and it can still tail stand making it nice to have the choice.

TX25C2 = approx $95, 965lm OTF with 15.800lux throwing 251 meters, throwing as well as many lights twice its size (BTW this thing throws better than any XM-L drop in I've had or seen as its reflector is the same diameter) its a very impressive little light.

SX25L3 = approx $135, 2375lm OTF with 25.100lux throwing 317 meters - $40 more for nearly 2.5x the light output @ only 24mm longer and 14mm wider than TX25C2 - there are other MT-G lights out there for around the same price and output but they are twice the size but not twice the throw. (for throw I will have the DEFT X :thumbsup:

 

[holylight]

**NEW** Eagtac SX25L3 (3x18650, 2750lm)

Is there anywhere to order Eagletac lights that don't charge over $50 for international shipping??

eBay

 

[Glenn7]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

eBay

Ebay is good with a reputable seller (but a reputable seller will still charge post) cheap is cheap for a reason, you run the risk of unpredictable sellers that can sell you a factory second, damaged/marked body, under performing led, refurbished returned light, even a knock off light, and that can cost you return post not to mention warranty issues down the road.

I have bought a few lights off lightjunction (they have been great to deal with) and have only paid $30ish post to Oz, add to that CPFSAVE12 = 12% off - they have 13 in stock (for preorder) of the MT-G but only the non kit ones - Its a bad time for our $ right now

 

[GordoJones88]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

In my experience, pre-ordering from a specific vendor just means that vendor will likely receive their allotted light shipment long after all the other vendors have received theirs and shipped them out to customers. I ain't pre-ordering again.

 

[rickypanecatyl]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

1 light is a fluke, 2 lights is bad luck, 3 lights you are doing something wrong.

Could that be:
- Not treating it like the delicate flower it is?
- Expecting it to be tougher than a $25 DX special?
- Using it outside?



Full disclosure is I am not gentle on my lights. My lights get wet, muddy, often dropped (though I don't think my latest d series has ever seen rain or a fall). But Eagletac's I bought 3-4 years ago handled all that abuse and they have been getting progressively more fragile and quirky. I'm sure they are still "tactical" level lights... as long as "tactical" doesn't include outside, rain, dirt, harsh enviornments... god forbid a "tactical" mall cop pee his pants with a ET clipped in his front pocket!

My point of posting in this thread with the "Newest" ET lights is that unless a manufacturer realizes potential customers both notice and care about less visible issues such as reliability why would they do anything about slipping quality control? I like the specs of their new lights; I'm hoping they make them well.

 

[easilyled]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

My point of posting in this thread with the "Newest" ET lights is that unless a manufacturer realizes potential customers both notice and care about less visible issues such as reliability why would they do anything about slipping quality control? I like the specs of their new lights; I'm hoping they make them well.

I appreciate the warning from someone with obvious experience and it makes me think twice. Whilst the compact size and enticing specs are tempting (in addition to the reasonble price point), I'm not too sure I want a delicate flower.

 

[GordoJones88]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

Full disclosure is I am not gentle on my lights.
My lights get wet, muddy, often dropped.

You have proven my point.
You do not take proper care of your lights.
That is in no way the fault of the manufacturer.

 

[romteb]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

My own appreciation (wich is probably as relevant as any other anecdotal reports...) of Eagletac's flashlight reliability is that it's better than most other mainstream flashlight makers, and they are on the cutting edge regarding specs and features to begin with.

Zebralight > Eagletac > Nitecore > everybody else> 4sevens (and sister companies) > DX junk.

 

[Mr. Tone]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

Any more news on when these will actually be available? Have any of our great reviewers gotten their hands on one?

 

[GordoJones88]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

Any more news on when these will actually be available?

Email Christina and ask if they have left China yet?

 

[Mr. Tone]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

FWIW I emailed GoingGear about a possible timeline. They stated that it is probably still a couple weeks out yet.

 

[Yodaman]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

Anyone heard of the Eagletac SX25L3 MT-G2 LED 2750 Lumen?

Wondering if it is even possible for a light this small to hit that many lumens? Any information would help.

 

[tatasal]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

+1

Although the ET specs say the ANSI rating is about 2300 lumens. Waiting for a review by SB.

 

[rejsr]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

EagleTac USA says they're hoping they'll be shipped next week, with pre-order units going out the week after

 

[tatasal]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

EagleTac USA says they're hoping they'll be shipped next week, with pre-order units going out the week after

Are pre-order units discounted in price? If so, by how much?

 

[GordoJones88]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

Nearly every Eagletac light Selfbuilt has reviewed,
he has estimated a higher brightness than ET listed specs.

However, almost every 1000+ lumen light he has ever tested won't fit in his lightbox :

" *est refers to estimates for lights that are too big to fit within my lightbox,
based on comparison to the ceiling bounce performance of known lights."

Since he recently tested the SX25L2 with a 47mm head,
it seems the SX25L3 with the same 47mm head should fit within his lightbox.

SX25L2 : 47mm x 240mm = 1000 lumens
SX25L3 : 47mm x 144mm = 2400 lumens

Regardless, the SX25L3 is going to set a new standard for which SB can estimate lights.

It is very exciting!

 

[Gravitron]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

Anyone heard of the Eagletac SX25L3 MT-G2 LED 2750 Lumen?

Wondering if it is even possible for a light this small to hit that many lumens? Any information would help.

Oh yes, it will definitely hit 2000+ lumens. I bought a mt-g2 drop-in a few months ago to put in my C2 and it is a monster, a jaw dropping monster. It runs direct drive on two aw imr's.

 

[rejsr]

Re: **NEW** Eagtac SX25L3 (3x18650, 2750lm)

Are pre-order units discounted in price? If so, by how much?

CPF members get a 10% discount on all orders, including pre-orders

 

[Gentlemansflashlight]

**NEW** Eagtac SX25L3 (3x18650, 2750lm)

Wow. ET has really impressed me with my TX25C2 and my GX25C2. These lights even replaced my PD32UE as my edc and prevented me from going the surefire route.

I think I'll stick to my TK75 and my TM26 before I buy the SX35... At least for a month.

Scott


Sent from my iPad using Tapatalk HD