srfreddy
Enlightened
Re: Donut hole, doughnut hole
The TD15X has one too, just get over the big hole and bring it outside.
The TD15X has one too, just get over the big hole and bring it outside.
Fenix TK35 XM-L T6 - review (BEAMSHOTS e COMPARISON)
- Thread starter mefistofele86
- Start date
Help Support Candle Power Flashlight Forum
Any help with the measurements from the photo that I posted...?
Thanks.
Thanks.
Interesting that quite a number of people have viewed this thread since I asked yesterday for a couple of pretty simple measurements...including at least one owner, yet, not even one response nor PM to help out.
Is there simply a lack of measuring tools available out there?
Bueller? Bueller?
:shrug:
Is there simply a lack of measuring tools available out there?
Bueller? Bueller?
:shrug:
TigerhawkT3
Flashlight Enthusiast
Sorry for the delay, I only just got this light yesterday.
The face, the area with the "Fenix TK35" label, is 34.5mm tall (between the rounded grippy parts). The width of the body at that point, including the rounded grippy parts, is 41mm. The "depth" of the body, between the labeled face and the unlabeled face, is 21mm. The tail section is 33mm by 43mm. By comparison, the body of a D-cell Mag is about 39mm wide, so the TK35 is a couple mm wider, but of course it's not that wide all around.
The face, the area with the "Fenix TK35" label, is 34.5mm tall (between the rounded grippy parts). The width of the body at that point, including the rounded grippy parts, is 41mm. The "depth" of the body, between the labeled face and the unlabeled face, is 21mm. The tail section is 33mm by 43mm. By comparison, the body of a D-cell Mag is about 39mm wide, so the TK35 is a couple mm wider, but of course it's not that wide all around.
unique
Enlightened
Thanks for the review. I just bought of these last night. It will be my newest flash light purchase in two years! I never in a million years would have thought I would have such a collection after buying the TK10. Even after two years of not bothering looking at flashlights I decided to buy another one even after two years :laughing:.
Can't wait to test this out. I work at a place where there are vast empty fields(just trees and few buildings apart from each other) of pitch black at night so this light will be awesome to use there when walking around the site.
Can't wait to test this out. I work at a place where there are vast empty fields(just trees and few buildings apart from each other) of pitch black at night so this light will be awesome to use there when walking around the site.
mefistofele86
Newly Enlightened
Thanks for the review. I just bought of these last night. It will be my newest flash light purchase in two years! I never in a million years would have thought I would have such a collection after buying the TK10. Even after two years of not bothering looking at flashlights I decided to buy another one even after two years :laughing:.
Can't wait to test this out. I work at a place where there are vast empty fields(just trees and few buildings apart from each other) of pitch black at night so this light will be awesome to use there when walking around the site.
Thank you! You will appreciate TK35 a lot thanks to its useful beam and its size.
unique
Enlightened
No problem
People saying the light has a donut hole, I think you should just live with it. I don't see how if can affect your use in anyway. My TK11 R2 has very faint donut hole you can see but it's never been a problem.
Whitelitee
Newly Enlightened
How hard would that be to replace, and where could I get a better switch or cover?
Thanks
Last edited:
Kilted
Enlightened
No problem
People saying the light has a donut hole, I think you should just live with it. I don't see how if can affect your use in anyway. My TK11 R2 has very faint donut hole you can see but it's never been a problem.
I just bought one and came in the mail today. The "hole" I do not see as a "hole". A doughnut hole implies an absence of light which is truly not the case. It seems to me to be a reflector artifact that is adding extra light around the outside edge of the beam pattern.
Die is perfectly centered and color looks good slight green on low and other levels appear to be OK.
I have replaced a number of often used lights with LED bulbs in my house and discovered the HUGH range of colors you get from various vendors for the same color temp.
The flashlight's color appears to be well with in the "normal" range. My TK40 tint is a lot warmer than the TK35.
=D~~Kilted
Last edited:
roadkill1109
Flashlight Enthusiast
- Joined
- Mar 11, 2011
- Messages
- 2,309
Re: Donut hole, doughnut hole
After reading your posts, i tried out all my lights from 4sevens, Lumintop, Trustfire, iTP, Fenix, at a certain distance, there will be a visible donut hole, it goes away when you move the flashlight away from the wall (or in my case table) you are shining your light on. Not really an issue since you'd most likely be using this big light for objects several feet away.
After reading your posts, i tried out all my lights from 4sevens, Lumintop, Trustfire, iTP, Fenix, at a certain distance, there will be a visible donut hole, it goes away when you move the flashlight away from the wall (or in my case table) you are shining your light on. Not really an issue since you'd most likely be using this big light for objects several feet away.
roadkill1109
Flashlight Enthusiast
- Joined
- Mar 11, 2011
- Messages
- 2,309
SkyPup
Newly Enlightened
My TK35 gets allot of use night hunting, great hand torch!
squaat
Newly Enlightened
Re: Donut hole, doughnut hole
This is really quite true. My tk35 does indeed have a donught hole, however it is only noticeable when white wall hunting from less than 3m, which is not a distance where you would need 820 lumens. In real life usage, the slight doughnut hole doesn't have any noticeable effect.
This is really quite true. My tk35 does indeed have a donught hole, however it is only noticeable when white wall hunting from less than 3m, which is not a distance where you would need 820 lumens. In real life usage, the slight doughnut hole doesn't have any noticeable effect.
lswindell4
Newly Enlightened
Re: Donut hole, doughnut hole
I have used numerous flashlights in my career in the US Army Infantry and mainly used Surefires towards the end of my career. I still have a Surefire D2 Defender with updated drop in, a Streamlight Stylus Pro, Olight S10 Baton, Olight M21-X Warrior (which I would use as a room clearer if in an active duty combat role), a 500 Lun frontgate (gift from a friend) and a Fenix TK35. The tk35 is by far the brightest light I have and the one I use most outside, as I live in the country in an isolated area. I have experienced no problems with donut holes in real life situations. I am an avid outdoorsman and have put the tk35 through some rough use and it has held up great. I am impressed by the runtimes I am getting with standard CR123A's. I am in the process of researching the best 18650 batteries/charger, particularly for my for my tk35, Olight M21 X and Surefire. I definitely recommend the tk35!
I have used numerous flashlights in my career in the US Army Infantry and mainly used Surefires towards the end of my career. I still have a Surefire D2 Defender with updated drop in, a Streamlight Stylus Pro, Olight S10 Baton, Olight M21-X Warrior (which I would use as a room clearer if in an active duty combat role), a 500 Lun frontgate (gift from a friend) and a Fenix TK35. The tk35 is by far the brightest light I have and the one I use most outside, as I live in the country in an isolated area. I have experienced no problems with donut holes in real life situations. I am an avid outdoorsman and have put the tk35 through some rough use and it has held up great. I am impressed by the runtimes I am getting with standard CR123A's. I am in the process of researching the best 18650 batteries/charger, particularly for my for my tk35, Olight M21 X and Surefire. I definitely recommend the tk35!
Last edited:
roadkill1109
Flashlight Enthusiast
- Joined
- Mar 11, 2011
- Messages
- 2,309
Re: Donut hole, doughnut hole
Congrats about your story about the TK35! It works great with Panasonic cells. From my own experience after owning the light for almost 3 years now, i've had no such problems with the light. If you want to purchase protected 18650's get the ones that are based on Panasonic Cells (like Eagletac's, Efest, Orbtronic, etc etc) As for the chargers, maybe the Sysmax i4 charger might be to your liking.
There is a new TK35 V2 which uses the newer U2 led for an added boost of output 820 (old) 860 (new), plus the boot is no longer made of plastic material, also some minor changes in the knurling. Just an FYI if you cant get enough of this light and want another.
Good luck with your battery/charger hunt!
Congrats about your story about the TK35! It works great with Panasonic cells. From my own experience after owning the light for almost 3 years now, i've had no such problems with the light. If you want to purchase protected 18650's get the ones that are based on Panasonic Cells (like Eagletac's, Efest, Orbtronic, etc etc) As for the chargers, maybe the Sysmax i4 charger might be to your liking.
There is a new TK35 V2 which uses the newer U2 led for an added boost of output 820 (old) 860 (new), plus the boot is no longer made of plastic material, also some minor changes in the knurling. Just an FYI if you cant get enough of this light and want another.
Good luck with your battery/charger hunt!
LightCrazy
Enlightened
Re: Donut hole, doughnut hole
I would be interested in this light some time. Does anyone have any experience with the newest U2 version? Thanks.
I would be interested in this light some time. Does anyone have any experience with the newest U2 version? Thanks.
