Sold/Expired Interested in a handmade holster? (CR2type , etc)

[kazu]

Hi alvin70-san,

Thank you very much!
Domo Arigato alvin70-san

I am glad to have you like a holster.
Thanks again, (moichido arigato!)

kazu

Domo Arigato Kazu-san, i've received the holster that Flashlight-san ordered for me on my behalf, its a very nice and well made and it fits my Fenix P1 perfectly, once again thank you and much appreaciated.

alvin

 

[nakahoshi]

Bump!!! kazu, i recieved the holster today. It fits my HDS edc PERFECT!
For the price, a custom made holster to my personal flavor, this is just amazing.
This is top quality, the belt clip is very very nice, i wassnt sure how it would work out, but its very strong, its about an inch wide, and i wouldnt be afraid of it falling off my belt, not a chance. The black leather is very very nice, all the edges are smooth, very nice detail. I like the magnetic clip, it doesnt take any pressure to secure it. KAZU, GREAT WORK!!!! Fast shipping. A custom built holster, top notch. HIGHLY RECOMENDED!!!!

 

[kazu]

Hi nakahoshi,

Thank you very much!

I am glad to have you like a holster.
Thanks again,
kazu

Bump!!! kazu, i recieved the holster today. It fits my HDS edc PERFECT!
For the price, a custom made holster to my personal flavor, this is just amazing.
This is top quality, the belt clip is very very nice, i wassnt sure how it would work out, but its very strong, its about an inch wide, and i wouldnt be afraid of it falling off my belt, not a chance. The black leather is very very nice, all the edges are smooth, very nice detail. I like the magnetic clip, it doesnt take any pressure to secure it. KAZU, GREAT WORK!!!! Fast shipping. A custom built holster, top notch. HIGHLY RECOMENDED!!!!

 

[Norm]

Bump!!! kazu, i recieved the holster today. It fits my HDS edc PERFECT!
For the price, a custom made holster to my personal flavor, this is just amazing.
This is top quality, the belt clip is very very nice, i wassnt sure how it would work out, but its very strong, its about an inch wide, and i wouldnt be afraid of it falling off my belt, not a chance. The black leather is very very nice, all the edges are smooth, very nice detail. I like the magnetic clip, it doesnt take any pressure to secure it. KAZU, GREAT WORK!!!! Fast shipping. A custom built holster, top notch. HIGHLY RECOMENDED!!!!

Just received my holster from Kazu and I can say I agree with everything nakahoshi said. My holster is a nice light tan leather with a gold magnetic clip. Perfect fit for my HDS the light, it slides in with with just the right amount of resistance a perfect snug fit. Like nakahoshi I was a little worried about the belt clip but once it's clipped to your belt you have to lift the bottom of the clip to remove it from your belt.
:goodjob: :goodjob: :goodjob: :goodjob: :goodjob:

 

[kazu]

Hi Norm,

Thank you very much!

It was good that it arrived safely.
I am glad to have you like a holster.

Yes,The clip is very powerful!

Thanks again,
kazu

Just received my holster from Kazu and I can say I agree with everything nakahoshi said. My holster is a nice light tan leather with a gold magnetic clip. Perfect fit for my HDS the light, it slides in with with just the right amount of resistance a perfect snug fit. Like nakahoshi I was a little worried about the belt clip but once it's clipped to your belt you have to lift the bottom of the clip to remove it from your belt.
:goodjob: :goodjob: :goodjob: :goodjob: :goodjob:

 

[Per Arne]

Hi kazu,



I was just wondering if you would consider making following holsters:



Black Leather Holster to fit the Surefire E1L with the original Clip, KL4 Conversion LED Head (http://www.surefire.com), McTc Tailcap (Aleph) from Sandwich Shoppe (http://theledguy.chainreactionweb.com/index.php) and a Rubber BeamShaper (F04). Total length of 102mm and 31mm in diameter. The Bezel with the BeamShaper has to be down in the holster with the tail cap up for the lanyard.

- Black Button Snap Closure

- Belt loop 1 inch.



Black Leather Holster to fit the Surefire E1L with the original Clip, KL4 Conversion LED Head (http://www.surefire.com), McTc Tailcap (Aleph) from Sandwich Shoppe (http://theledguy.chainreactionweb.com/index.php) and a Rubber BeamShaper (F04). Total length of 102mm and 31mm in diameter. The Bezel with the BeamShaper has to be down in the holster with the tail cap up for the lanyard.

- Black Button Snap Closure

- Belt loop 1.5 inch.



Black Leather Holster to fit the MiniMiniMaglite AA with a Rubber Anti-Roll Head (similar to the F04) (http://candlepowerforums.com/vb/showthread.php?t=81679&page=1&pp=30)

Total length of 105mm and 32mm in diameter. The Bezel with the BeamShaper has to be down in the holster with the tail cap up for the lanyard.

- Black Button Snap Closure

- Belt loop 1 inch.



Total of 3 holsters, price and shipping cost to Norway?



Thanks!



PA

 

[kazu]

Hi Per Arne,

Thank you for interest.

Please teach size.
http://mav.nifty.com/ahp/textview.cgi?kazuroom+28902+44

>Black Button Snap Closure
Is it a hook not a magnet?

Total cost is $30 * 3 + $9 = $99

 

[D MacAlpine]

Hi Kazu,

Holster arrived today - only 3 days from Japan!
You did an excellent job of packing it and it looks great (as per your pictures on the first post).
I'll put an entry on the review thread when I get a chance.

Many thanks for the great service.

Don

:goodjob:

 

[Jay R]

Kazu. Please could you do one for Orb Raw NS with a short flap ( Like MacAlpine dual one but not battery holder.) Black leather, Nickel magnet rivet.

$28 yes ??


Also, Is it possible... One piece holder for 3 Orb Raw ( Not NS ) in row like - III , Three short flaps, black, nickel rivets. Please give price if possible to make ??

Thanks.

J.

 

[kazu]

Hi D MacAlpine,

Thank you very much!

It was good that it arrived safely.
Arrival is very early in three days!
I am glad to have you like a holster.
I came to want it, too :laughing:

Thanks again,

Hi Kazu,

Holster arrived today - only 3 days from Japan!
You did an excellent job of packing it and it looks great (as per your pictures on the first post).
I'll put an entry on the review thread when I get a chance.

Many thanks for the great service.

Don

:goodjob:

 

[kazu]

Hi Jay R,

Thank you for interest.

Yes, $25 + $3 = $28

>One piece holder for 3 Orb Raw ?

Sorry, Please send a picture if possible.
ojino (at) nifty (dot) com

However, completion is the back for two weeks. （Four reservations）

Thanks,
kazu

Kazu. Please could you do one for Orb Raw NS with a short flap ( Like MacAlpine dual one but not battery holder.) Black leather, Nickel magnet rivet.

$28 yes ??


Also, Is it possible... One piece holder for 3 Orb Raw ( Not NS ) in row like - III , Three short flaps, black, nickel rivets. Please give price if possible to make ??

Thanks.

J.

 

[Grox]

Kazu, your work is beautiful. The holsters look amazing!

 

[Jay R]

$ 28 PayPal sent for one Raw NS holder in black with short flap. nickel rivet.


E'mail sent with design of 3 Raw holder.

Thanks.

Jay R

 

[Mirage_Man]

I'm interested in a black with nickel rivet for an HDS. Is there a difference in one made for with and without the HDS clip? Also what is a "short flap"?

Thanks,
MM

 

[Jay R]

I was asking for a short flap because the size is a bit long for a Raw NS and the flap over the top leaves a big gap. I think it's OK for most lights but the NS is so short I was asking if he could cut the flap down a bit so it fits better over the top of an NS. I saw that it was done with MacAlpines NS holder.

 

[kazu]

Grox, Thank you very much!

Kazu, your work is beautiful. The holsters look amazing!

 

[kazu]

Hi Jay R,

A slow reply is sorry.
PP received, Thank you very much!
short flap type OK.(ns)
However, it is this case belt loop.

Thank you for sending a picture.
Please wait about a cost of three Raw holder for a few days.
Consultation is necessary about a design.
I write it in an order list.

Thanks,
kazu

$ 28 PayPal sent for one Raw NS holder in black with short flap. nickel rivet.


E'mail sent with design of 3 Raw holder.

Thanks.

Jay R

 

[kazu]

Hi Mirage_Man,

Thank you for interest.
Does your HDS add a clip to the main body?

As for Hds of a clip, a head turns to the top, and it is the insertion.
http://mav.nifty.com/ahp/textview.cgi?kazuroom+28902+24

In this case I cannot but catch some pipes for a clip briefly.
However, a thing to make from this time is one kind.
When I took off a clip, I make it with length of preparation.
When I follow a clip and insert it, please put a spacer in a bottom.

>Also what is a "short flap"?

In the case of Raw ns, I make it to short length.

May I write it in a list?
HDS is $28.(The postage does not include it)

Thanks,
kazu

I'm interested in a black with nickel rivet for an HDS. Is there a difference in one made for with and without the HDS clip? Also what is a "short flap"?

Thanks,
MM

 

[D MacAlpine]

...Also, Is it possible... One piece holder for 3 Orb Raw ( Not NS ) in row like - III , Three short flaps, black, nickel rivets. ...

You do realise that the Raw is re-usable, don't you?

Actually, you're quite right - trying to re-use a Raw is not a good idea. Carry spares and send the used ones to me for specialist recycling.


Don

 

[Jay R]

You do realise that the Raw is re-usable, don't you?

Actually, you're quite right - trying to re-use a Raw is not a good idea. Carry spares and send the used ones to me for specialist recycling.


Don

Bugger ! I'd been throwing them away when the cell was flat.

3 Holder = Raw, Raw blue emitter, Raw Green emitter. Raw NS on the other side of the belt ( for balance..) A bit sad, I know...