big beam
Enlightened
The Cabelas extreme lights series( 2,3+4 cell ) also take P60 drop-ins.At least the ones from DX I have.
DON
DON
Here's a couple of cheap ones to add to the list:
Solarforce L2 (From ebay = Solarforce L2 ebay add )
G&P T6
+
Just thought I'd confirm a couple of lights from the list.
Today I received a Huntlight FP-01PJ (Luxeon version) and installed a 3SD w/ SMO reflector. Quality switch and solid build.
Note: the FP-01PJ will not take protected 18650, but protected 17670 fine.
Also an UltraFire WF-502D w/ a DX SSC P60 drop-in that will run from (2) 18650 protected cells.
I know its a slightly odd looking light, but should run for hours.
Do you mean Huntlight FT01PJ? I have a number of them, and all my protected 18650 cells (AW, Ultrafire, Trustfire, Battery Junction) fit just fine.
+
I meant the FT,..typo.
My protected cells could fit, but I'd have to take the FT apart to get them out, they wouldn't slide out.
No big deal.
Maybe you can tune up your cells. Roll them between to boards to align the internal components of the cell. Often they seem wider because the various cylinders are like an old Greek column that has segments that aren't aligned with one another.
Perhaps you should include the D26 standard, and not just the P60 notation in reference to such lamp assemblies.
The Romisen RC-M4 also takes P60 modules. It is a one-mode 1X18650 or 2X16340 host, but I do not know if it takes protected 18650 cells. I also do not know if it has a retaining ring holding the glass in place. The RC-E4 glass is loose.
I have also found that many P60 modules are tight in the RC-E4 and have to be pushed out from below. Today I inserted a new one-mode MTE Q5 (<$10), and it fits perfectly. The resistor in the switch makes this configuration a two-mode light.