Solscud007
Flashlight Enthusiast
My mini porky killer.
Surefire Lego?
- Thread starter flash_bang
- Start date
Help Support Candle Power Flashlight Forum
Here are a couple of mine thanks to TNC products and Bugsy714 for the C2. The E1e has a M31 in it and the C2 a M61. The TNC bezel is my first aftermarket bezel. It's awesome.
What type of head is on the C2?
archimedes
Flashaholic
I believe that's the TnC bezel....
ficklampa
Newly Enlightened
Had to put the original 3BL-head on my lego since the Z44 almost crushed the drop in. Didn't want to risk damaging it if I dropped the light or overtightened it.
bouncer33441
Newly Enlightened
- Joined
- Mar 12, 2011
- Messages
- 94
g2 body
cryos crenulated head
z58 clicky and cree xml dropin
soon to be a bored 6P or c2 body
cryos crenulated head
z58 clicky and cree xml dropin
soon to be a bored 6P or c2 body
bouncer33441
Newly Enlightened
- Joined
- Mar 12, 2011
- Messages
- 94
AND I FORGOT I WILL ALSO ADD A TRIAD TAILCAP WITH EITHER A MCLICKY FETTIE OR ZERO REZ SO A A P60 TRIPLE OR QUAD CAN BE DROPPED IN
Eisenhower
Newly Enlightened
- Joined
- Apr 19, 2012
- Messages
- 3
Just have a normal E1D ... My favorite EDC ..
Has anyone done a Malkoff VME head & M61 on a Surefire A2L? I'm thinking the two stage switch would work well with it.
I really need to get my A2L bored for 17670. It's a great light, but I rarely use it since I'm running mostly rechargeables.
I really need to get my A2L bored for 17670. It's a great light, but I rarely use it since I'm running mostly rechargeables.
off-topic here but have you seen the 16 mm diameter Li-Ions?
tested here: http://www.candlepowerforums.com/vb...iew-of-Intl-outdoor-Sanyo-16650-2100mAh-(Red)
Solscud007
Flashlight Enthusiast
A new option for Lego. E1B-AA body by Fire Kylin. The E1B like head and tailcap are on the E1-BK body below.
It01Firefox
Newly Enlightened
I tried a VME with M61w on my A2L last night and it worked fine with two levels. Unfortunately I don't have an MD2 with two stage ring, so I can' tell if the levels are the same.
Last edited:
brucejiang
Newly Enlightened
my latest one
RI Chevy
Flashlight Enthusiast
Looks like the engraver needs to learn how to spell! 
red_hackle
Enlightened
Just took a picture of the current state of my M2 lego lights...
Just took a picture of the current state of my M2 lego lights...
Nice, what adapter are you using to get those M3 bezels on the C2 bodies? Details on bulb setup?
red_hackle
Enlightened
This one has been assembled with a Surefire adapter that was removed from a KL3 head (before you order one to do the same, please note that these are glued and removal will not always work). The bezel is still in stock condition and runs a LED tower instead of a bulb.
This one uses a Leef adapter. It's actually without light engine at the moment - I am still undecided on the perfect setup and have a WTB out for another LED tower.
