panag
Enlightened
hallo guys I still have my tk61vn v2 fiatlux pdtc and it is stll gread!!!!!!!! my top thrower 665kcd!!!! second is my tn31mb with 410kcd
-
You must be a Supporting Member to participate in the Candle Power Forums Marketplace.
You can become a Supporting Member.
WTS: TK61vn - 1735 ANSI Lumen 622 KCD
- Thread starter Skylumen
- Start date
Help Support Candle Power Flashlight Forum
Any chance for a XHP35 HI in this light to take back the throne from the K50vn?
Or is there no driver available to drive this new LED?
I was just thinking the same thing. If somehow he can get a driver to run a xhp 35 in the tk61vn, it should take back the throne.
Any chance for a XHP35 HI in this light to take back the throne from the K50vn?
Or is there no driver available to drive this new LED?
There are buck drivers that can drive xhp-35 (drive hard!), but the battery carrier would also have to be converted from 2s2p to 4s cell configuration, which is a pain
but not impossible!Couple of beam shots using my TK61vn.
Daytime:
Nearer Cottage:
Farthest Cottage:
I am not sure about precise distances involved but as one can see from the daylight picture those dwellings are a good distance away. What an awesome light, I have had mine since late 2014 I think.
Daytime:
Nearer Cottage:
Farthest Cottage:
I am not sure about precise distances involved but as one can see from the daylight picture those dwellings are a good distance away. What an awesome light, I have had mine since late 2014 I think.
theres no way you can put another type of driver in this light to run a xhp35 HI? because if you can, this should outthrow the k70vn since the tk61 has a larger head right?
i still much prefer a side switch for these medium sized lights.
i still much prefer a side switch for these medium sized lights.
Capolini
Banned
^^^^^
MY VERSION already out throws it if VINHS LUX Numbers are relatively accurate. I have the V4 version as has been field tested @ 1 mile 27 yards which is 670Kcd....the K70 is measured only at 550 Kcd! tested
MY VERSION already out throws it if VINHS LUX Numbers are relatively accurate. I have the V4 version as has been field tested @ 1 mile 27 yards which is 670Kcd....the K70 is measured only at 550 Kcd! tested
Oztorchfreak
Flashlight Enthusiast
Oztorchfreak
Flashlight Enthusiast
Hey Vin.
What is the TK61vn50 XHP50 Dedome $270 (DriverVNX UI)
kcd rating and I suppose the beam tint is warmer than cool white due to dedoming?
Are you using the XHP35Hi yet in the TK61VN yet?
I found the Acebeam K50 body to be very slippery in my hand.
I had to use a special tape on it and it looks very bad now.
Are other Acebeam products like that?
CHEERS
What is the TK61vn50 XHP50 Dedome $270 (DriverVNX UI)
kcd rating and I suppose the beam tint is warmer than cool white due to dedoming?
Are you using the XHP35Hi yet in the TK61VN yet?
I found the Acebeam K50 body to be very slippery in my hand.
I had to use a special tape on it and it looks very bad now.
Are other Acebeam products like that?
CHEERS
Last edited:
Oztorchfreak
Flashlight Enthusiast
Capolini
Banned
Sorry!! I was rushing too much. TK61vn V4. The most output of ALL versions,only a handful made and sadly no longer available.
At least 750Kcd. I field tested it @ 1787yds/1 mile 27 yards/1634 meters[670Kcd] and it had plenty left!
see post #581 of closed[ :sigh: ]thread below.
http://www.candlepowerforums.com/vb/showthread.php?390749-SOLD-TK61vn-V4/page20
Last edited:
I still don't have a TK61vn, i still want one, how can i have such a light?
Difficult, payments here in Netherlands Europe, to send it to vinh...we have euro,s here.
How to contact him...for his highest kcD..rated light?
2 Can the TK61vn V4, project its beam/hotspot, at daylight, when it is cloudy totally overcast dark day?
Or even with sunny weather?
3 I have a stock Olight M2X UT Javelot........M3X UT Javelot, with 160 kcD, and 250 kcD, will there be really a noticeable, difference in intensity visibly...kcD?
Difficult, payments here in Netherlands Europe, to send it to vinh...we have euro,s here.
How to contact him...for his highest kcD..rated light?
2 Can the TK61vn V4, project its beam/hotspot, at daylight, when it is cloudy totally overcast dark day?
Or even with sunny weather?
3 I have a stock Olight M2X UT Javelot........M3X UT Javelot, with 160 kcD, and 250 kcD, will there be really a noticeable, difference in intensity visibly...kcD?
ven
Flashaholic
Remco, pm Kev(kj2) for info on duty, i dont have a problem in the UK and would recommend for the latest thrower, something along the lines of
http://www.candlepowerforums.com/vb/showthread.php?417092-K70vn-Favorite-Thrower
Nice control ring UI or check the k50vn V3 out too.....if you can find one!
http://www.candlepowerforums.com/vb/showthread.php?417092-K70vn-Favorite-Thrower
Nice control ring UI or check the k50vn V3 out too.....if you can find one!
I recommend you email Vinh. That's what he prefers.
[email protected]
Being simple and to the point usually gets clear replies
The TK61vn V4 has been discontinued (Vinh cited reliability issues). The regular TK61vn will have a noticeable difference in intensity over your Javolet. The farther the distance is, the greater you'll notice it.
Also, Fenix has discontinued the TK61. They are going to replace it with another thrower. It may be worth it to wait a little while longer to see what it is. It may be able to achieve better results than the TK61 after modding. Of course, there are other impressive throwers available now (e.g. K70vn) for you to consider.
