Batteryspace 12V-13.2V Reg Li-Ion Pack?

I'm thinking that the Li-Ion 12V-13.2V regulated battery pack from Batteryspace may be perfect for a homemade project I have.
http://www.batteryspace.com/index.asp?PageAction=VIEWCATS&Category=1069

Does anyone have any experience with this pack?

Thanks,
Dale

only one thing i can tell ya, that PCB protection curcuit is not good for the full 8Amps it keeps going out on me at 4amps :-( the specs page is confusing, says 5A, then 10A , anyways its about 4A

so as long as your only using 2A or the 20W total max (its rated for), should be good to go.

also there is a differance between the LG cells and the cheap china cells they sell, if you can have them make one with the LG cells it MIGHT be better, i donno for sure, but i get more issues of all sorts with the cheap china cells, i am testing a lot of them and its ok, but those are the conciderations i would put forth for discussin.

i dont know the pack, just the parts and pieces they are using to make it.

it should work exactly like they are saying, and the company backs thier products if you have problems.

Thanks VidPro,

I'm thinking of running 4 Cree XR-E's in series (or 4 series x 2 parallel) so worst case, I'll be around 21W.

The page says LG in one place (but not the other) so I'll have to email to confirm.

Thanks again for your response.
Dale