-
You must be a Supporting Member to participate in the Candle Power Forums Marketplace.
You can become a Supporting Member.
Sold/Expired Not FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
- Thread starter jayrob
- Start date
Help Support Candle Power Flashlight Forum
- Status
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Greg, it's a beauty!
It's a very efficient diode putting out 115mW's at only 121mA's. I am sending it with no battery per our agreement.
It will be in Monday's mail. Don't forget to remove the dust cap!
Jay
Greg, it's a beauty!
It's a very efficient diode putting out 115mW's at only 121mA's. I am sending it with no battery per our agreement.
It will be in Monday's mail. Don't forget to remove the dust cap!
Jay
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
You will not be dissapointed Doctor, Jay's builds are A+.
I have one of his 650nm lasers running at 289mw and it absolutly screams.
Ray
You will not be dissapointed Doctor, Jay's builds are A+.
I have one of his 650nm lasers running at 289mw and it absolutly screams.
Ray
Metatron
Banned
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Hi Jay, just a quick thank you for my 'cree' that arrived today safe and sound! We did it:thumbsup:
a question about eye safety, would polaroids be sufficient, if not could u post a link es to where i could get online protection to cover 405nm, or the nm the bluray emits.
Hi Jay, just a quick thank you for my 'cree' that arrived today safe and sound! We did it:thumbsup:
a question about eye safety, would polaroids be sufficient, if not could u post a link es to where i could get online protection to cover 405nm, or the nm the bluray emits.
Last edited:
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Please do not do anything to impair your vision!
Get a GOOD pair of glasses or goggles to protect your eyeballs, and please don't go cheap!
Get what you need here.........http://store.oemlasersystems.com/in..._10_15&zenid=a3ba4ca89823ab996b1f29a30d2f5576
Ray
Please do not do anything to impair your vision!
Get a GOOD pair of glasses or goggles to protect your eyeballs, and please don't go cheap!
Get what you need here.........http://store.oemlasersystems.com/in..._10_15&zenid=a3ba4ca89823ab996b1f29a30d2f5576
Ray
Metatron
Banned
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
http://store.oemlasersystems.com/in..._id=41&zenid=a3ba4ca89823ab996b1f29a30d2f5576
cheers for that, so just to confirm, the DIW would be sufficient for bluray?
http://store.oemlasersystems.com/in..._id=41&zenid=a3ba4ca89823ab996b1f29a30d2f5576
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Yes it would!
If you would want to obtain different "color" lasers, you might want to look at some of the different options before you order.
I now have 650nm and 532nm lasers so I opted for the ML7's (I'm pretty sure that they will cover 405nm also but only somewhere around OD1-2), i'm still looking for a BR and 635nm laser.
Good luck,
Ray
Yes it would!
If you would want to obtain different "color" lasers, you might want to look at some of the different options before you order.
I now have 650nm and 532nm lasers so I opted for the ML7's (I'm pretty sure that they will cover 405nm also but only somewhere around OD1-2), i'm still looking for a BR and 635nm laser.
Good luck,
Ray
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Thanks for the props Ray! And for posting that link for the safety goggles...
Metatron, smart move to get the goggles. Not absolutely necessary for just pointing if your careful, but if your going to focus for burning, you definitely should have the proper eye protection...
tanasit, yours is shipping Monday! I know I keep saying this... but your going to like it!
Putting out 115mW's at 139mA's. Please take a minute to read the included instruction sheet. Let me know when you get it!
Jay
Thanks for the props Ray!
And for posting that link for the safety goggles...Metatron, smart move to get the goggles. Not absolutely necessary for just pointing if your careful, but if your going to focus for burning, you definitely should have the proper eye protection...
tanasit, yours is shipping Monday! I know I keep saying this... but your going to like it!
Putting out 115mW's at 139mA's. Please take a minute to read the included instruction sheet. Let me know when you get it!
Jay
Last edited:
mikepesikan
Newly Enlightened
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Jayrob
I would like a Blue ray set at 115mw's, pm sent with request.
Mike
Jayrob
I would like a Blue ray set at 115mw's, pm sent with request.
Mike
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
PM replied Mike!
You will not be disappointed...
Jay
PM replied Mike!
You will not be disappointed...
Jay
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
jeffconlaserbot, yours is ready! I will ship tomorrow. (Wednesday)
(Beam shot - with some smoke)
Set at 110mW's per your request. I have included an instruction sheet with some safety considerations. Please take a minute to read it. Let me know when you get it!
Jay
jeffconlaserbot, yours is ready! I will ship tomorrow. (Wednesday)
(Beam shot - with some smoke)
Set at 110mW's per your request. I have included an instruction sheet with some safety considerations. Please take a minute to read it. Let me know when you get it!
Jay
Last edited:
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
mikepesikan, yours will be in tomorrow's mail! (Thursday's)
It's set just a tad higher than we talked about... 118mW / 137mA's.
Please get back to me...
Jay
mikepesikan, yours will be in tomorrow's mail! (Thursday's)
It's set just a tad higher than we talked about... 118mW / 137mA's.
Please get back to me...
Jay
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Note: I will have a very limited number of 6X sleds available soon! These diodes will be a $50 dollar upgrade above the normal Pocket Mini price of $190. These 6X blu-ray diodes can be set between 150mW's and 200mW's. I have my personal 6X set at 209mW's. I use it on special occasions. I keep a very conservative duty cycle of 30 sec. on / 30 sec. off.
(I do not guarantee diode life. But will rebuild at no charge. You pay for parts and shipping)
Jay
Note: I will have a very limited number of 6X sleds available soon!
These diodes will be a $50 dollar upgrade above the normal Pocket Mini price of $190. These 6X blu-ray diodes can be set between 150mW's and 200mW's. I have my personal 6X set at 209mW's. I use it on special occasions. I keep a very conservative duty cycle of 30 sec. on / 30 sec. off.(I do not guarantee diode life. But will rebuild at no charge. You pay for parts and shipping)
Jay
Last edited:
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Another Pocket Mini hitting the Post Office on Monday...
This one is yours Steven!
Set at 120mW's per your request. I found a very efficient diode for you. Running at 128mA's.
Instruction sheet and safety recommendations included. Please let me know when you get it...
Jay
Another Pocket Mini hitting the Post Office on Monday...
This one is yours Steven!
Set at 120mW's per your request. I found a very efficient diode for you.
Running at 128mA's.Instruction sheet and safety recommendations included. Please let me know when you get it...
Jay
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
mksak, yours is getting shipped tomorrow! (Tuesday)
Set at 80mW's per your request... The diode should have a long life at this setting.
Your not going to believe this, but this 80mW blu-ray is just as bright visually as my 150mW 803T build! It is one of the longer wavelength diodes. (seems like this happens often when I set the power lower)
Let me explain how I test this. No fancy equipment or anything... I shine the lasers side by side in the dark, at the ceiling. (30' distance)
I can then see how much reflection bounces off of the ceiling and hits the adjacent wall. You can see the brightness in the reflection. This seems to be a good way to compare visual brightness. (IMO)
Anyway, even though it is set at only 80mW's, it is a SCHWEET blu-ray!
Let me know when you get it...
Jay
mksak, yours is getting shipped tomorrow! (Tuesday)
Set at 80mW's per your request... The diode should have a long life at this setting.
Your not going to believe this, but this 80mW blu-ray is just as bright visually as my 150mW 803T build! It is one of the longer wavelength diodes. (seems like this happens often when I set the power lower)
Let me explain how I test this. No fancy equipment or anything... I shine the lasers side by side in the dark, at the ceiling. (30' distance)
I can then see how much reflection bounces off of the ceiling and hits the adjacent wall. You can see the brightness in the reflection. This seems to be a good way to compare visual brightness. (IMO)
Anyway, even though it is set at only 80mW's, it is a SCHWEET blu-ray!
Jay
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
PM replied!
These are superb builds! Besides the size, a great feature of this host/driver combination, is the option of being able to use a Lithium primary (CR123), or a Lithium rechargeable! (RCR123)
You will not be disappointed...
Jay
PM replied!
These are superb builds! Besides the size, a great feature of this host/driver combination, is the option of being able to use a Lithium primary (CR123), or a Lithium rechargeable! (RCR123)
You will not be disappointed...
Jay
Last edited:
Ferry
Newly Enlightened
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Hi Jay, Merry Christmas!
I just received my 110mW's blu-ray pocket mini laser, 1 day before x-mas! It's really x-mas present for me.. :laughing:
And yes Jay, I really like it's florescent 'beamshoot'
BTW, What is the default focus point? is it 5 inch? :thinking:
Regards,
FF
Hi Jay, Merry Christmas!
I just received my 110mW's blu-ray pocket mini laser, 1 day before x-mas! It's really x-mas present for me.. :laughing:
And yes Jay, I really like it's florescent 'beamshoot'
BTW, What is the default focus point? is it 5 inch? :thinking:
Regards,
FF
Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or Red
Glad to know that it made it all the way to Indonesia for you!
Thanks for posting and letting me know...
I set the focus for best visual dot at 30' distance. This seems to be the 'sweet spot' for general pointing.
For burning (proper eye protection recommended), turning the focus ring counter clockwise will focus for closer distances.
Point it at something black at 5' distance, as you turn the focus ring counter clockwise, the dot will get very tiny, at it's smallest, it will smoke the material...
Jay
Glad to know that it made it all the way to Indonesia for you!
Thanks for posting and letting me know...
I set the focus for best visual dot at 30' distance. This seems to be the 'sweet spot' for general pointing.
For burning (proper eye protection recommended), turning the focus ring counter clockwise will focus for closer distances.
Point it at something black at 5' distance, as you turn the focus ring counter clockwise, the dot will get very tiny, at it's smallest, it will smoke the material...
Jay
Last edited:
- Status
