Sold/Expired P60 modules - warm, neutral, cool white/XPG- XML / SST-50 -90 P60 modules (part 8)

[n-bk3p]

Cree XM-L 2.8-6 volts $40
T50 flux Bin E4 4500K neutral white
3 level Hi / Med / Low 2.8 amp Regulated with memory
LOP reflector
Potting with tape $5

Cree XP-G $35
R4 5000k 3C tint
1 level 2.8-6 volts 1.4 amp
OP reflector
Thermal Potting $5

To be used with Surefire 6P and Z2 (AW P18650x1 CR123x2)

International shipping (up to two modules) $5

add CC 4%

TOTAL $93

 

[stienke]

Hi ,I want to order:

Cree XM-L
T50 flux Bin E4 4500K neutral white
Smooth reflector
3 level Hi / Med / Low
2.8 amps
Thermal Potting
International shipping!

Total 50 dollar

Host is a Solarforce L2P with one protected 18650 (2900 Mah)
BTW , does the smooth reflector has a nice beam with the XM-L?

Got it today , works perfect!
Thanks,

GJR :wave:

 

[nailbender]

What I was trying to say is that the Dereelight pill option was mentioned only in the SST-50 section and not in the XM-L section. I would like to order a XM-L pill.

Hi

They are the same price as a regular module is. If you back track a couple of pages you will soon see they have been ordered, I will try and move so it doesn't look like just sst 50's. The possible levels are the same as a regular module is.

Dave

 

[Hallmcc]

HI Dave,

Paypal sent $45.00 for XM-L T6 smooth 3 level

Hall

 

[nc_hooper]

Hi Dave,

Thanks for the clarification regarding XM-L, SST-50, etc and Dereelight pills.

I would like to purchase a pill for my Dereelight DBS V3. I will be using one 18650 2900 MAH battery with this pill.

- Cree XM-L, T50 flux Bin E4 neutral white
- 2.8 amp driver (2.8-6.0 volt), 3 Level Hi/Med/Low
- Dereelight pill only (no reflector)
- Potting with tape

TOTAL $45

Paypal will be sent in the next few minutes.

Thanks,

Andy (nc_hooper)

 

[AnotherADDiction]

Hi Dave,
Loving all of your luminosity and need some more



I would like to try the high CRI that everyone talks about. This time my order is for:
DUAL XPG (Linger Special)$45 with the Q23000K 7A3 (90 minimum CRI) NEW
3 level 2.5 amp 3.6-6 volts max
Thermal Potting & tape $5
Total sent: $50.00

Thanks!
AnotherADDiction

 

[Jaybee64]

Hi Dave,

Totally dim myself on all the available options - would welcome your recommendation.

Making an EDC light for myself - 6PD head, Fivemega 3P body - will be running single AW IMR 18350. Going to get one of Ahorton's aspheric lens kits.

I'd like the coolest white LED - the XRE's seem to be the most recommended on his thread but I'm out of touch a little with developments. Won't need a reflector I think but will want thermal potting.

Thanks in advance.

JB

 

[Viper715]

I would like a
P60 Cree XML T30 E7 Warm white
2.8 Amps
3 Level H/M/L with memory
Thermal potting with tape
OP reflector
$45

Paypal on the way.


Best Regard,
Eric

 

[JoVo]

Hello Dave!

I received my high cri XP-G drop-in and I really like it!
I'm wondering if the white sticker on the outter reflector has to be removed for better heat conduction?

Is it possible to get a Linger Special with high cri XP-G and single mode? Which voltage could that driver use?
Thank you!

Jonas

 

[PhilM]

Hi mate

PayPal sent for SST50 Dropin for L2P (1x 18650);
2 mode High/Low
LOP Reflector
Thermal Potting $5
Int Shipping $5

$75 total, many thanks :thumbsup:

 

[mirage98]

I've been reading the threads for the past couple of days. I'm in the market for a Red LED light to use for hunting. Specifically, this would be a rifle mounted light. I would need a setup with very good throw.

Everyone recommends these custom modules, but not sure exactly what I need to get going. If anyone could assist, I'd appreciate it. SST-50, Red Dragon? What shell, etc?

If there is a how-to guide anywhere with the basics, please forward me along.

Even though this is generic, I do believe the answers will lead me to buying one of these P60 modules listed in the thread. I just don't know what I need to be as of yet.

 

[MIC-1]

Cree XM-L T30 flux bin E7 3000K Warm White
1 level
2.8A
LOP
Potting with tape
International shipping
CC 4%
Total: $52

 

[nailbender]

Hi Dave,

Totally dim myself on all the available options - would welcome your recommendation.

Making an EDC light for myself - 6PD head, Fivemega 3P body - will be running single AW IMR 18350. Going to get one of Ahorton's aspheric lens kits.

I'd like the coolest white LED - the XRE's seem to be the most recommended on his thread but I'm out of touch a little with developments. Won't need a reflector I think but will want thermal potting.

Thanks in advance.

JB

Hi

I have had members use either a R2 XRE which is the narrowest beam or I have also had R5 XPG's ( more spill )when ordered to use with Ahortons aspherics. I do not own this set up but they have all seemed satisfied for purpose they were using.

Dave

 

[nailbender]

I've been reading the threads for the past couple of days. I'm in the market for a Red LED light to use for hunting. Specifically, this would be a rifle mounted light. I would need a setup with very good throw.

Everyone recommends these custom modules, but not sure exactly what I need to get going. If anyone could assist, I'd appreciate it. SST-50, Red Dragon? What shell, etc?

If there is a how-to guide anywhere with the basics, please forward me along.

Even though this is generic, I do believe the answers will lead me to buying one of these P60 modules listed in the thread. I just don't know what I need to be as of yet.

HI

The red platinum dragon is a good emitter and the truest of the reds. I also have a Red XPE which will use slightly less power and while still close to true red will be a bit more orange. There are no such thing as a red SST 50 as far as I know. I have some red SST 90 but they use alot of power and are more of a flood emitter than a thrower.

The viewing angle on the platinum dragon and the XPE are about the same and while the dragon may be a bit stronger it is not by a whole lot.

Dave

 

[PT1764]

Hello, Dave.
A little while ago I had contacted you on CPF regarding Wolf-Eyes lamp assembly upgrade. Results of that project were quite pleasing - I am using it every day for night walks with dog. I am wondering if you could do one more. This time I am thinking about XM-L T50 emitter. Since XM-L has much larger die and driven at 2.8A, I need to ask you if it feasible to fit it and driver into WE drop-in and also keep heat management under control on high levels(planning to use thermal potting to dissipate heat through side walls of drop-in housing).
If XM-L emitter not a feasible solution, I would go for XP-G again.

Thanks in advance,
Eugene.

 

[emu124]

:wave:
Received my two drop-ins.
The XM-L, even the 3000K warm white, is amazingly bright and a perfect drop-in with it's nice tint :thumbsup:

Thanks Dave

 

[SgtCuts]

Nailbender,

I am looking at purchasing one of your drop ins. I am looking for the most possible throw so I believe from what I have read here on this fine forum that the XRE would be the best bet can you make me one of these with only 1 mode also would a smooth reflector give a longer throw or is your OP reflector the best for the job? Thanks for your time

Sarge

 

[candle lamp]

Hi Dave,

Well received XM-L T50 flux Bin E4 neutral white. Thanks
Very well made and nice beam pattern as well.

- Distance : about 70cm from the white color door
- Brightness : Med. mode of the 3 levels(high, med. low)

ISO200, F/2.8, 1/250 sec, WB (manual)
.

ISO200, F/2.8, 1/400 sec, WB (manual)
.
The above pictures don't look like reality.
To my eyes, the spot beam is yellow and spill looks like very light-purple.

I'm intereted in T40 flux bin 5B3 neutral White & T30 flux bin E7 3000K Warm White as well.
Can you tell about its tint or show beamshot?
Anybody can show the beamshot?

Thanks,

 

[AnotherADDiction]

:thumbsup:Wow, I just receive my Linger Special with the Q23000K 7A3 (90 minimum CRI)-
It is FANTASTIC. I had never had a high CRI before, but always liked the warm/neutral emitters. This thing just kicks some serious butt!
It feels like I am carrying around a light bulb. It can't get dark fast enough.
I am very excited about getting out on the dark bike trails and see what it is really like - around the house just doesn't do it justice.
I think that anyone who likes a warm tint has to get one - you don't know what you are missing. It is much betterer than I had hoped for.:twothumbs
It just 'feels' so much easier on the eyes, almost a relaxed feeling - I guess it is the opposite of the old 'angry blue'
I hope that they continue to work the high CRI magic and increase the output
Once again, THANKS DAVE!!!! Once again you have exceeded my expectations!

 

[Knives&Lights]

$40 for XPG Q2300K7A3 90 CRI, 2.8-6V, SMO, Plotted. 5 level preferred but will take 3 level is 5 is not available in 2.8-6V. Thank You.